Datasheet4U Logo Datasheet4U.com

MAX5914A - +48V Quad Hot-Swap Controllers

Download the MAX5914A datasheet PDF. This datasheet also covers the MAX5913A variant, as both devices belong to the same +48v quad hot-swap controllers family and are provided as variant models within a single manufacturer datasheet.

General Description

The MAX5913A/MAX5914A are quadruple hot-swap controllers.

The MAX5913A/MAX5914A independently control four external n-channel switches to hot-swap system loads from a single VCC supply line.

The devices allow the safe insertion and removal of power devices from live network ports.

Key Features

  • an active-low relay driver that sinks current when the relay output is enabled. The MAX5914A features an activehigh relay driver output that sources 1mA to drive an external FET relay driver when the relay output is enabled. Control circuitry ensures the relays and the FETs are off until VCC reaches the UVLO threshold. The MAX5913A/MAX5914A use an external sense resistor to enable all the internal current-sense functions. The MAX5913A/MAX5914A feature a programmable analog current-limit circuit.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MAX5913A_MaximIntegratedProducts.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MAX5914 +48V Quad Hot-Swap Controllers Maxim Integrated
MAX5910 +65V Simple Swapper Hot-Swap Switches Maxim
MAX5911 -48V Simple Swapper Hot-Swap Switches Maxim
MAX5912 -48V Simple Swapper Hot-Swap Switches Maxim Integrated
MAX5913 +48V Quad Hot-Swap Controllers Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX5913A +48V Quad Hot-Swap Controllers
MAX5924 N-channel Hot-swap Controllers
MAX5925 N-channel Hot-swap Controllers
MAX5926 N-channel Hot-swap Controllers
MAX5933A Positive High-Voltage Hot-Swap Controllers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-3302; Rev 0; 5/04 +48V Quad Hot-Swap Controllers For Power-Over-LAN General Description The MAX5913A/MAX5914A are quadruple hot-swap controllers. The MAX5913A/MAX5914A independently control four external n-channel switches to hot-swap system loads from a single VCC supply line. The devices allow the safe insertion and removal of power devices from live network ports. The operating supply voltage range is between +35V and +72V. The devices are intended for applications in Power-Over-Media-Dependent Interface (MDI), but are not limited to such usage. The MAX5913A/MAX5914A feature an internal underwww.DataSheet4U.com voltage lockout (UVLO) function that prevents the FET from turning on, if VCC does not exceed the default value of +32V.