Datasheet4U Logo Datasheet4U.com

MAX6384 - Low-Power uP Reset Circuits

Download the MAX6384 datasheet PDF. This datasheet also covers the MAX6390 variant, as both devices belong to the same low-power up reset circuits family and are provided as variant models within a single manufacturer datasheet.

Description

The MAX6381

MAX6390 microprocessor (µP) supervisory circuits monitor power supply voltages from +1.8V to +5.0V while consuming only 3µA of supply current at +1.8V.

Features

  • o Factory-Set Reset Threshold Voltages Ranging from +1.58V to +4.63V in Approximately 100mV Increments o ±2.5% Reset Threshold Accuracy Over Temperature (-40°C to +125°C) o Seven Reset Timeout Periods Available: 1ms, 20ms, 140ms, 280ms, 560ms, 1120ms, 1200ms (min) o 3 Reset Output Options Active-Low Push-Pull Active-High Push-Pull Active-Low Open-Drain o Reset Output State Guaranteed Valid Down to VCC = 1V o Manual Reset Input (MAX6384/MAX6385/MAX6386) o Auxiliary RESET IN (MAX6387/MAX6388/MAX63.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MAX6390_MaximIntegratedProducts.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MAX638 +5V/Adjustable CMOS Step-down Switching Regulator Maxim
MAX6380 Ultra-Low-Power SC70/SOT23 Voltage Detectors Maxim Integrated
MAX630 CMOS Micropower Step-UP Switching Regulator Maxim
MAX6301 Low-Power uP Supervisory Circuits Maxim
MAX6302 Low-Power uP Supervisory Circuits Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX6381 Low-Power uP Reset Circuits
MAX6382 Low-Power uP Reset Circuits
MAX6383 Low-Power uP Reset Circuits
MAX6385 Low-Power uP Reset Circuits
MAX6386 Low-Power uP Reset Circuits

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.datasheet4u.com 19-1839; Rev 1; 04/01 SC70, Single/Dual Low-Voltage, Low-Power µP Reset Circuits General Description The MAX6381–MAX6390 microprocessor (µP) supervisory circuits monitor power supply voltages from +1.8V to +5.0V while consuming only 3µA of supply current at +1.8V. Whenever VCC falls below the factory-set reset thresholds, the reset output asserts and remains asserted for a minimum reset timeout period after VCC rises above the reset threshold. Reset thresholds are available from +1.58V to +4.63V, in approximately 100mV increments. Seven minimum reset timeout delays ranging from 1ms to 1200ms are available. The MAX6381/MAX6384/MAX6387 have a push-pull active-low reset output.
Published: |