Datasheet4U Logo Datasheet4U.com

MAX6616 - Dual-Channel Temperature Monitors and Fan-Speed Controllers

This page provides the datasheet information for the MAX6616, a member of the MAX6615 Dual-Channel Temperature Monitors and Fan-Speed Controllers family.

Description

The MAX6615/MAX6616 monitor two temperature channels, either the internal die temperature and the temperature of an external thermistor, or the temperatures of two external thermistors.

Features

  • six GPIOs to provide additional flexibility. All of the GPIOs power-up as inputs, with the exception of GPIO0, which powers up as either an input or an output as determined by connecting the PRESET pin to ground or VCC. The MAX6616 is available in a 24-pin QSOP package, while the MAX6615 is available in a 16-pin QSOP package. Both devices operate from a single-supply voltage range of 3.0V to 5.5V, have operating temperature ranges of -40°C to +125°C, and consume just 500µA of supply current. o T.

📥 Download Datasheet

Datasheet preview – MAX6616

📁 Similar Datasheet

  • MAX6610 - Precision / Low-Power / 6-Pin SOT23 Temperature Sensors and Voltage References (Maxim)
  • MAX6611 - Precision / Low-Power / 6-Pin SOT23 Temperature Sensors and Voltage References (Maxim)
  • MAX6613 - Low-Voltage Analog Temperature Sensor (Maxim)
  • MAX660 - Switched Capacitor Voltage Converter (Texas Instruments)
  • MAX660 - Switched Capacitor Voltage Converter (National Semiconductor)
  • MAX660 - CMOS Monolithic Voltage Converter (Maxim)
  • MAX6605 - Low-Power Analog Temperature Sensor (Maxim)
  • MAX6607 - Low-Voltage Analog Temperature Sensors (Maxim)
  • MAX6608 - Low-Voltage Analog Temperature Sensors (Maxim)
  • MAX660CPA - CMOS Monolithic Voltage Converter (Maxim Integrated)
Other Datasheets by Maxim Integrated Products
  • MAX6612 - High-Slope Low-Power - Analog Temperature Sensor in an SC70 Package
  • MAX6615 - Dual-Channel Temperature Monitors and Fan-Speed Controllers
  • MAX6618 - PECI-to-I2C Translator
  • MAX6602 - Five-Channel Precision Temperature Monitor
  • MAX6603 - Platinum RTD-to-Voltage Signal Conditioner
  • MAX6620 - Quad Linear Fan-Speed Controller
  • MAX6621 - PECI-to-I2C Translator
  • MAX6622 - 5-Channel Precision Temperature Monitor

Full PDF Text Transcription

Click to expand full text
19-3713; Rev 2; 10/08 www.DataSheet4U.com Dual-Channel Temperature Monitors and Fan-Speed Controllers with Thermistor Inputs General Description The MAX6615/MAX6616 monitor two temperature channels, either the internal die temperature and the temperature of an external thermistor, or the temperatures of two external thermistors. The temperature data controls a PWM output signal to adjust the speed of a cooling fan, thereby minimizing noise when the system is running cool, but providing maximum cooling when power dissipation increases. The fans’ tachometer output signals are monitored by the MAX6615/MAX6616 to detect fan failure. If a fan failure is detected, the FAN_FAIL output is asserted.
Published: |