Datasheet4U Logo Datasheet4U.com

MAX8903B - 1-Cell Li+ DC-DC Charger

Description

The MAX8903B is an integrated 1-cell Li+ charger and Smart Power Selector™ with dual (AC adapter and USB) power inputs.

The switch mode charger uses a high switching frequency to eliminate heat and allow for tiny external components.

Features

  • optimized smart power control to make the best use of limited USB or adapter power. Battery charge current and SYS output current limit are independently set. Power not used by the system charges the battery. Charge current and SYS output current limit can be set up to 2A, while USB input current can be set to 100mA or 500mA. Automatic input selection switches the system load from battery to external power. The DC input operates from 4.15V to 16V with up to 20V protection, while the USB input ha.

📥 Download Datasheet

Datasheet preview – MAX8903B

📁 Similar Datasheet

  • MAX8903C - 2A 1-Cell Li+ DC-DC Charger (Maxim Integrated)
  • MAX8903D - 2A 1-Cell Li+ DC-DC Charger (Maxim Integrated)
  • MAX8903E - 2A 1-Cell Li+ DC-DC Charger (Maxim Integrated)
  • MAX8903G - 2A 1-Cell Li+ DC-DC Charger (Maxim Integrated)
  • MAX8903H - 2A 1-Cell Li+ DC-DC Charger (Maxim Integrated)
  • MAX8903J - 2A 1-Cell Li+ DC-DC Charger (Maxim Integrated)
  • MAX8903N - 2A 1-Cell Li+ DC-DC Charger (Maxim Integrated)
  • MAX8903Y - 2A 1-Cell Li+ DC-DC Charger (Maxim Integrated)
  • MAX890L - Current-Limited, High-Side P-Channel Switch (Maxim)
  • MAX891L - 2A / Current-Limited / High-Side P-Channel Switch (Maxim)
Other Datasheets by Maxim Integrated Products
  • MAX8903A - 2A 1-Cell Li+ DC-DC Charger
  • MAX8900A - 1.2A Switch-Mode Li+ Chargers
  • MAX8900B - 1.2A Switch-Mode Li+ Chargers
  • MAX8900C - 1.2A Switch-Mode Li+ Chargers
  • MAX8901A - Highest Efficiency Supply
  • MAX8901B - Highest Efficiency Supply
  • MAX8902A - Low-Noise 500mA LDO Regulators
  • MAX8902B - Low-Noise 500mA LDO Regulators

Full PDF Text Transcription

Click to expand full text
MAX8903B 19-4502; Rev 1; 11/09 EVAALVUAAILTAIOBNLEKIT 2A, 1-Cell Li+ DC-DC Charger for USB and Adapter Power General Description The MAX8903B is an integrated 1-cell Li+ charger and Smart Power Selector™ with dual (AC adapter and USB) power inputs. The switch mode charger uses a high switching frequency to eliminate heat and allow for tiny external components. It can operate with either separate inputs for USB and AC adapter power, or from a single input that accepts both. All power switches for charging and switching the load between battery and external power are included on-chip. No external MOSFETs, blocking diodes, or current-sense resistors are required. The MAX8903B features optimized smart power control to make the best use of limited USB or adapter power.
Published: |