Description
16KB (8K x 16) Program Flash Up to 512 Bytes (256 x 16) Data Flash 512 Bytes (256 x 16) RAM Low-Power, Eight Differential-Channel, 12-Bit, 500ksps ADC PGA, Software-Selectable Gain: 1V/V, 2V/V, 4V/V, 8V/V, 16V/V, 32V/V 12-Bit DAC with Buffered Voltage Output External References for ADC and DAC Internal (Die) and External Diode Temperature Sensing Full CAN 2.0B Controller 15 Message Centers (256-Byte Dual Port Memory) Programmable Bit Rates from 10kbps to 1Mbps Standard 11-Bit or Extended 29-Bit Identification Modes Two Data Masks and Associated IDs for DeviceNET™, SDS, and Other Higher Layer CAN Protocols External Transmit Disable for Autobaud SIESTA Low-Power Mode Wake-Up on CANRXD Edge Transition UART (LIN) with User-Programmable Baud Rate 16 x 16 Hardware Multiplier with 48-Bit Accumulator, Single Clock-Cycle Operation Three 16-Bit (or Six 8-Bit) Programmable Timer/Counter/PWM Eight General-Purpose, Digital I/Os, with External Interrupt Capability Wake-Up Capable Interrupts Internal Oscillator for Use with External Crystal Internal RC Oscillator Eliminates External Crystal External Clock-Source Operation Programmable Watchdog Timer Power-On Reset (POR) Power-Supply Supervisor/Brownout Detection for Digital I/O and Digital Core Supplies On-Chip +3.3V, 50mA Linear Regulator Extensive Debug and Emulation Support In-System Test Capability Flash-Memory-Program Download Software Bootstrap Loader for Flash Programming MAXQ7666 o Smart Analog Peripherals o Timer/Digital I/O Peripherals o Crystal/Clock Module.
