Datasheet4U Logo Datasheet4U.com

KS8995XA - Integrated 5-Port 10/100 QoS Switch

Description

The KS8995XA is a highly integrated Layer-2 quality of service (QoS) switch with optimized bill of materials (BOM) cost for low port count, cost-sensitive 10/100Mbps switch systems.

Features

  • Integrated switch with five MACs and five Fast Ethernet transceivers fully compliant to IEEE 802.3u standard.
  • Shared memory based switch fabric with fully nonblocking configuration.
  • 10BASE-T, 100BASE-TX and 100BASE-FX modes (FX in Ports 4 and 5).
  • Dual MII configuration: MII-Switch (MAC or PHY mode MII) and MII-P5 (PHY mode MII).
  • VLAN ID tag/untag options, per-port basis.
  • Enable/disable option for huge frame size up to 1916 bytes per frame.

📥 Download Datasheet

Datasheet Details

Part number KS8995XA
Manufacturer Micrel Semiconductor
File Size 422.93 KB
Description Integrated 5-Port 10/100 QoS Switch
Datasheet download datasheet KS8995XA Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
KS8995 5 Port 10/100 Switch with PHY ETC
KS81AA80 eMMC 5.1 KONSEMI
KS823C03 SCHOTTKY BARRIER DIODE Fuji Electric
KS823C04 SCHOTTKY BARRIER DIODE Fuji Electric
KS823C09 SCHOTTKY BARRIER DIODE Fuji Electric

Other Datasheets by Micrel Semiconductor

Part Number Description
KS8995X Integrated 5-Port 10/100 QoS Switch
KS8995E 5-Port 10/100 Integrated Switch
KS8995FQ Integrated 5-Port 10/100 Managed Switch
KS8995FQ Integrated 5-Port 10/100 Managed Switch
KS8995M Integrated 5-Port 10/100 Managed Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
KS8995XA Integrated 5-Port 10/100 QoS Switch Rev 2.6 General Description The KS8995XA is a highly integrated Layer-2 quality of service (QoS) switch with optimized bill of materials (BOM) cost for low port count, cost-sensitive 10/100Mbps switch systems. It also provides an extensive feature set including three different QoS priority schemes, a dual MII interface for BOM cost reduction, rate limiting to offload CPU tasks, software and hardware power-down, a MDC/MDIO control interface and port mirroring/monitoring to effectively address both current and emerging Fast Ethernet applications.
Published: |