MIC2041 - Single Channel Low Voltage Power Distribution Switch
Micrel Semiconductor
Download the MIC2041 datasheet PDF.
This datasheet also covers the MIC2040 variant, as both devices belong to the same single channel low voltage power distribution switch family and are provided as variant models within a single manufacturer datasheet.
General Description
The MIC2040 and MIC2041 are high side MOSFET switches optimized for general purpose power distribution applications that require circuit protection.
Key Features
a auto-reset circuit breaker mode that latches the output off upon detecting an overcurrent condition lasting more than 28ms. The output is reset by removing or reducing the load. Data sheets and support documentation can be found on Micrel’s web site at www. micrel. com. Features.
Full PDF Text Transcription for MIC2041 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
MIC2041. For precise diagrams, and layout, please refer to the original PDF.
MIC2040/2041 Micrel MIC2040/2041 Single Channel Low Voltage Power Distribution Switch General Description The MIC2040 and MIC2041 are high side MOSFET switches optimized ...
View more extracted text
ption The MIC2040 and MIC2041 are high side MOSFET switches optimized for general purpose power distribution applications that require circuit protection. The devices switch up to 5.5V and as low as 0.8V while offering both programmable current limiting and thermal shutdown to protect the device and the load. A fault status output is provided in order to detect overcurrent and thermal shutdown fault conditions. Both devices employ soft start circuitry to minimize the inrush current in applications that employ highly capacitive loads. Additionally, the MIC2040/41 is suited for multi-port USB applications to satisfy upstream
MIC2041 Datasheet
