Datasheet4U Logo Datasheet4U.com

MIC281 - Thermal Sensor

Description

The MIC281 is a digital thermal sensor capable of measuring the temperature of a remote PN junction.

It is optimized for applications favoring low cost and small size.

Features

  • the same industry-leading noise performance and small size. The advanced integrating A/D converter and analog front-end reduce errors due to noise for maximum accuracy and minimum guardbanding. A 2-wire SMBus 2.0-compatible serial interface is provided for host communication. The clock and data pins are 5Vtolerant regardless of the value of VDD. They will not clamp the bus lines low even if the device is powered down. Superior performance, low power, and small size make.

📥 Download Datasheet

Datasheet Details

Part number MIC281
Manufacturer Micrel Semiconductor
File Size 642.75 KB
Description Thermal Sensor
Datasheet download datasheet MIC281 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MIC281 Low-Cost Thermal Sensor Microchip
MIC280 Precision IttyBitty Thermal Supervisor Microchip
MIC28303 3A Power Module Microchip
MIC28304 3A Power Module Hyper Speed Controller Microchip
MIC284 Two-Zone Thermal Supervisor Microchip

Other Datasheets by Micrel Semiconductor

Part Number Description
MIC280 Thermal Supervisor
MIC2800 Digital Power Management
MIC2803 High-Voltage High-Current Darlington Array
MIC2804 High-Voltage High-Current Darlington Array
MIC2807 RF PA Power Management

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MIC281 Low-Cost IttyBitty™ Thermal Sensor General Description The MIC281 is a digital thermal sensor capable of measuring the temperature of a remote PN junction. It is optimized for applications favoring low cost and small size. The remote junction may be an inexpensive commodity transistor, e.g., 2N3906, or an embedded thermal diode such as found in Intel Pentium® II/III/IV CPUs, AMD Athlon® CPUs, and Xilinx Virtex® FPGAs. The MIC281 is 100% software and hardware backward compatible with the MIC280 and features the same industry-leading noise performance and small size. The advanced integrating A/D converter and analog front-end reduce errors due to noise for maximum accuracy and minimum guardbanding. A 2-wire SMBus 2.0-compatible serial interface is provided for host communication.
Published: |