900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Micrel Semiconductor

MIC2951 Datasheet Preview

MIC2951 Datasheet

150mA Low-Dropout Voltage Regulator

No Preview Available !

MIC2950*/2951
150mA Low-Dropout Voltage Regulator
General Description
Features
The MIC2950 and MIC2951 are “bulletproof” micropower
voltage regulators with very low dropout voltage (typically
40mV at light loads and 250mV at 100mA), and very low
quiescent current. Like their predecessors, the LP2950 and
LP2951, the quiescent current of the MIC2950/MIC2951
increases only slightly in dropout, thus pro-longing battery
life. The MIC2950/MIC2951 are pin for pin compatible with
the LP2950/LP2951, but offer lower dropout, lower
quiescent current, reverse battery, and automotive load
dump protection.
The key additional features and protection offered include
higher output current (150mA), positive transient protection
for up to 60V (load dump), and the ability to survive an
unregulated input voltage transient of –20V below ground
(reverse battery).
The plastic DIP and SOIC versions offer additional system
functions such as programmable output voltage and logic
controlled shutdown. The 3-pin TO-92 MIC2950 is pin-
compatible with the older 5V regulators.
These system functions also include an error ag output
that warns of a low output voltage, which is often due to
failing batteries on the input. This may also be used as a
power-on reset. A logic-compatible shutdown input is also
available which enables the regulator to be switched on and
off. This part may also be pin-strapped for a 5 V output, or
programmed from 1.24 V to 29 V with the use of two
external resistors.
Data sheets and support documentation can be found on
Micrel’s web site at: www.micrel.com.
High accuracy 3.3, 4.85, or 5V, guaranteed 150mA
output
Extremely low quiescent current
Low-dropout voltage
Extremely tight load and line regulation
Very low temperature coefficient
Use as regulator or reference
Needs only 1.5µF for stability
Current and thermal limiting
Unregulated DC input can withstand –20V reverse
battery and +60V positive transients
MIC2951 Version Only
Error flag warns of output dropout
Logic-controlled electronic shutdown
Output programmable from 1.24 to 29V
Applications
Automotive electronics
Voltage reference
Avionics
Cellular telephones
Battery powered equipment
SMPS post-regulator
High efficiency linear power supplies
___________________________________________________________________________________________________________
Block Diagram
* MIC2950 Discontinuance September 2007.
MM8 is a registered trademark of Micrel, Inc.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
February 2010
M9999-021610




Micrel Semiconductor

MIC2951 Datasheet Preview

MIC2951 Datasheet

150mA Low-Dropout Voltage Regulator

No Preview Available !

Micrel, Inc.
MIC2950/2951
The MIC2950 is available as either an -05 or -06 version.
The -05 and -06 versions are guaranteed for junction
temperatures from –40°C to +125°C; the -05 version has
a tighter output and reference voltage specication
range over temperature. The MIC2951 is available as an
-02 or -03 version.
The MIC2950 and MIC2951 have a tight initial tolerance
(0.5% typical), a very low output voltage temperature
coefcient which allows use as a low-power voltage
reference, and extremely good load and line regulation
(0.04% typical). This greatly reduces the error in the
overall circuit, and is the result of careful design
techniques and process control.
___________________________________________________________________________________________________________
Ordering Information
Part Number
MIC2950-05BZ*
MIC2950-06BZ*
MIC2951-02BM
MIC2951-03BM
MIC2951-02BN**
MIC2951-03BN
MIC2951-03BMM
MIC2951-3.3BM
MIC2950-05YZ*/***
MIC2950-06YZ*/***
MIC2951-02YM***
MIC2951-03YM***
MIC2951-03YN***
MIC2951-03YMM***
MIC2951-3.3YM***
Voltage
5.0V
5.0V
5.0V
5.0V
5.0V
5.0V
5.0V
3.3V
5.0V
5.0V
5.0V
5.0V
5.0V
5.0V
3.3V
Accuracy
0.5%
1.0%
0.5%
1.0%
0.5%
1.0%
1.0%
1.0%
0.5%
1.0%
0.5%
1.0%
1.0%
1.0%
1.0%
Junction
Temperature Range
–40° to +125°C
–40° to +125°C
–40° to +125°C
–40° to +125°C
–40° to +125°C
–40° to +125°C
–40° to +125°C
–40° to +125°C
–40° to +125°C
–40° to +125°C
–40° to +125°C
–40° to +125°C
–40° to +125°C
–40° to +125°C
–40° to +125°C
Package
3-Pin TO-92
3-Pin TO-92
8-Pin SOIC
8-Pin SOIC
8-Pin Plastic DIP
8-Pin Plastic DIP
8-Pin MSOP
8-Pin SOIC
3-Pin TO-92
3-Pin TO-92
8-Pin SOIC
8-Pin SOIC
8-Pin Plastic DIP
8-Pin MSOP
8-Pin SOIC
Lead Finish
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Pb-Free
Pb-Free
Pb-Free
Pb-Free
Pb-Free
Pb-Free
Pb-Free
Note:
* TO-92 Package discontinuance notification issued September 2007. End-of-life-buy offer thru December 31, 2007. Contact factory for
additional information.
** Contact factory for Pb-Free version.
*** Pb-Free RoHS compliant with ‘high-melting solder’ exemption.
February 2010
2 M9999-021610


Part Number MIC2951
Description 150mA Low-Dropout Voltage Regulator
Maker Micrel Semiconductor
PDF Download

MIC2951 Datasheet PDF






Similar Datasheet

1 MIC2950 150mA Low-Dropout Voltage Regulator
Micrel Semiconductor
2 MIC29500 High-Current Low Dropout Regulators
Microchip
3 MIC29500 High-Current Low-Dropout Regulators
Micrel
4 MIC29501 High-Current Low Dropout Regulators
Microchip
5 MIC29501 (MIC29xxx) High-Current Low-Dropout Regulators
Micrel
6 MIC29502 High-Current Low Dropout Regulators
Microchip
7 MIC29502 (MIC29xxx) High-Current Low-Dropout Regulators
Micrel
8 MIC29503 High-Current Low Dropout Regulators
Microchip
9 MIC29503 (MIC29xxx) High-Current Low-Dropout Regulators
Micrel





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy