Datasheet4U Logo Datasheet4U.com

MIC5255 - 150mA Low Noise UCap CMOS LDO

Description

The MIC5255 is an efficient, precise CMOS voltage regulator optimized for ultra-low-noise applications.

It offers 1% initial accuracy, extremely-low dropout voltage (135mV at 150mA) and low ground current (typically 90µA).

Features

  • include current limit, thermal shutdown, faster transient response, and an active clamp to speed up device turn-off. Available in the 6-pin 2mm × 2mm MLF™ package, the IttyBitty® SOT-23-5 package and the new Thin SOT-235, which offers the same footprint as the standard IttyBitty® SOT-23-5, but only 1mm tall. The MIC5255 offers a range of output voltages. All support documentation can be found on Micrel’s web site at www. micrel. com. Features.

📥 Download Datasheet

Datasheet Details

Part number MIC5255
Manufacturer Micrel Semiconductor
File Size 129.89 KB
Description 150mA Low Noise UCap CMOS LDO
Datasheet download datasheet MIC5255 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MIC5200 100mA Low-Dropout Regulator Microchip
MIC5202 Dual 100mA Low-Dropout Regulator Microchip
MIC5205 150mA Low-Noise LDO Regulator Microchip
MIC5210 Dual 150mA LDO Regulator Microchip
MIC5211 Dual uCap 80mA LDO Regulator Microchip

Other Datasheets by Micrel Semiconductor

Part Number Description
MIC5250 Dual 150mA Cap CMOS LDO Regulator Preliminary Information
MIC5252 Low Noise uCap CMOS LDO
MIC5253 100mA Low Noise UCap Teeny LDO
MIC5254 Dual 150mA uCap LDO
MIC5256 150mA UCap LDO with Error Flag

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MIC5255 Micrel MIC5255 150mA Low Noise µCap CMOS LDO General Description The MIC5255 is an efficient, precise CMOS voltage regulator optimized for ultra-low-noise applications. It offers 1% initial accuracy, extremely-low dropout voltage (135mV at 150mA) and low ground current (typically 90µA). The MIC5255 provides a very-low-noise output, ideal for RF applications where a clean voltage source is required. A noise bypass pin is also available for further reduction of output noise. Designed specifically for handheld and battery-powered devices, the MIC5255 provides a TTL-logic-compatible enable pin. When disabled, power consumption drops nearly to zero.
Published: |