Datasheet4U Logo Datasheet4U.com

MIC5512 - Single 300mA LDO

General Description

The MIC5512/14 is an advanced general-purpose LDO ideal for powering general-purpose portable devices.

The MIC5512/14 family of products provides a highperformance 300mA LDO in an ultra-small 1.6mm x 1.6mm Thin DFN package.

Key Features

  • Input voltage range: 2.5V to 5.5V Fixed output voltage range: 1.0V to 3.3V 300mA guaranteed output current ±1% initial output accuracy Stable with 1µF ceramic output capacitors Low dropout voltage: 160mV @ 300mA Output discharge circuit Internal enable pull down resistor (MIC5514) Available in ultra-small 6-pin 1.6mm × 1.6mm Thin DFN package.

📥 Download Datasheet

Datasheet Details

Part number MIC5512
Manufacturer Micrel Semiconductor
File Size 736.06 KB
Description Single 300mA LDO
Datasheet download datasheet MIC5512 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MIC5060 Ultra Small High-Side MOSFET Driver Micrel
MIC5166 DDR Terminator Microchip
MIC5200 100mA Low-Dropout Regulator Microchip
MIC5202 Dual 100mA Low-Dropout Regulator Microchip
MIC5205 150mA Low-Noise LDO Regulator Microchip

Other Datasheets by Micrel Semiconductor

Part Number Description
MIC5514 Single 300mA LDO
MIC5501 Single 300mA LDO
MIC5502 Single 300mA LDO
MIC5503 Single 300mA LDO
MIC5504 Single 300mA LDO

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MIC5512/14 Single 300mA LDO in 1.6mm × 1.6mm Thin DFN Package General Description The MIC5512/14 is an advanced general-purpose LDO ideal for powering general-purpose portable devices. The MIC5512/14 family of products provides a highperformance 300mA LDO in an ultra-small 1.6mm x 1.6mm Thin DFN package. The MIC5512 and MIC5514 LDOs include an auto-discharge feature on the output that is activated when the enable pin is low. The MIC5514 have an internal pull down resistor on the enable pin that will disable the output when the enable pin is left floating, this is ideal for applications where the control signal is floating during processor boot up.