Datasheet4U Logo Datasheet4U.com

MIC7300 - High-Output Drive Rail-to-Rail Op Amp Preliminary Information

Description

The MIC7300 is a high-performance CMOS operational amplifier featuring rail-to-rail input and output with strong output drive capability.

It is able to source and sink in excess of 80mA into large capacitive loads.

Features

  • Small footprint SOT-23-5 and power MSOP-8 packages >80mA peak output sink and source with 5V supply Drives large capacitive loads (6000pF with 10V supply) Guaranteed 2.2V, 3V, 5V, and 10V performance 500kHz gain-bandwidth product 0.01% total harmonic distortion at 1kHz (10V, 2kΩ) 1mA typical power supply current at 5V.

📥 Download Datasheet

Datasheet Details

Part number MIC7300
Manufacturer Micrel Semiconductor
File Size 114.36 KB
Description High-Output Drive Rail-to-Rail Op Amp Preliminary Information
Datasheet download datasheet MIC7300 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MIC7122 Rail-to-Rail Dual Op Amp Microchip
MIC1555 IttyBitty RC Timer/Oscillator Microchip
MIC1557 IttyBitty RC Timer/Oscillator Microchip
MIC184 Local/Remote Thermal Supervisor Microchip
MIC2003 Fixed and Adjustable Current Limiting Power Distribution Switches Microchip

Other Datasheets by Micrel Semiconductor

Part Number Description
MIC70 P Supervisory Circuits
MIC705 (MIC705 - MIC708) Supervisory Circuits
MIC706 (MIC705 - MIC708) Supervisory Circuits
MIC706P uP Supervisory Circuit
MIC706R uP Supervisory Circuit

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MIC7300 Micrel MIC7300 High-Output Drive Rail-to-Rail Op Amp Preliminary Information General Description The MIC7300 is a high-performance CMOS operational amplifier featuring rail-to-rail input and output with strong output drive capability. It is able to source and sink in excess of 80mA into large capacitive loads. The input common-mode range extends beyond the rails by 300mV, and the output voltage typically swings to within 150µV of both rails when driving a 100kΩ load. The amplifier operates from 2.2V to 10V and is fully specified at 2.2V, 3V, 5V, and 10V. Gain bandwidth and slew rate are 500kHz and 0.5V/µs, respectively.
Published: |