Download the MIC94062 datasheet PDF.
This datasheet also covers the MIC94061 variant, as both devices belong to the same high side power switches family and are provided as variant models within a single manufacturer datasheet.
General Description
The MIC94060-63 are high-side load switches designed for operation between 1.7V to 5.5V.
The devices contain a low on-resistance P-channel MOSFET that supports over 2A of continuous current.
Key Features
an active load discharge circuit which insures capacitive loads retain no charge when the main switch is in an OFF state. MIC94060-61 feature rapid turn on while MIC94062-63 provide a slew rate controlled Soft-Start turn-on of 800µs (typical) to prevent in-rush current from glitching supply rails. An active pull-down on the enable input keeps MIC94060-63 in a default OFF state until the EN pin is pulled to a high level. Built-in level shift circuitry allows low voltage logic signals to switch hi.
Note: The manufacturer provides a single datasheet file (MIC94061_MicrelSemiconductor.pdf) that lists specifications for multiple related part numbers.
Full PDF Text Transcription for MIC94062 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
MIC94062. For precise diagrams, and layout, please refer to the original PDF.
MIC94060/61/62/63 www.DataSheet4U.com High Side Power Switches General Description The MIC94060-63 are high-side load switches designed for operation between 1.7V to 5.5V...
View more extracted text
re high-side load switches designed for operation between 1.7V to 5.5V. The devices contain a low on-resistance P-channel MOSFET that supports over 2A of continuous current. The MIC94061and MIC94063 features an active load discharge circuit which insures capacitive loads retain no charge when the main switch is in an OFF state. MIC94060-61 feature rapid turn on while MIC94062-63 provide a slew rate controlled Soft-Start turn-on of 800µs (typical) to prevent in-rush current from glitching supply rails. An active pull-down on the enable input keeps MIC94060-63 in a default OFF state until the EN pin is pulled to a high level
MIC94062 Datasheet
