MIC94065 Datasheet High Side Power Switches

Manufacturer: Micrel Semiconductor

Overview: MIC94064/5 High Side Power Switches General.

Download the MIC94065 datasheet PDF. This datasheet also includes the MIC94064 variant, as both parts are published together in a single manufacturer document.

📥 Download Datasheet

MIC94065 high side power switches by Micrel Semiconductor - Datasheet Preview

Datasheet Details

Part number	MIC94065
Manufacturer	Micrel Semiconductor
File Size	572.23 KB
Description	High Side Power Switches
Download	MIC94065 Download (PDF)

General Description

The MIC94064 and MIC94065 are high-side load switches designed for operation between 1.7V to 5.5V.

The devices contain a low on-resistance P-channel MOSFET that supports over 2A of continuous current.

The MIC94064/5 provides a slew rate controlled SoftStart turn-on of 115µs (typical) to prevent in-rush current from glitching supply rails.

Key Features

an active load discharge circuit which insures capacitive loads retain no charge when the main switch is in an OFF state. An active pull-down on the enable input keeps MIC94064/5 in a default OFF state until the EN pin is pulled to a high level. Built-in level shift circuitry allows low voltage logic signals to switch higher supply voltages, or vice versa; high level logic signals can control low level voltages. The MIC94064/5’s operating voltage range makes them suitable for 1-cell Lithium ion.

More Datasheets from Micrel Semiconductor

Part Number	Description
MIC94060	High Side Power Switches
MIC94061	High Side Power Switches
MIC94062	High Side Power Switches
MIC94063	High Side Power Switches
MIC94064	High Side Power Switches
MIC94066	(MIC94066 - MIC94069) Dual High Side Power Switches
MIC94067	(MIC94066 - MIC94069) Dual High Side Power Switches
MIC94068	(MIC94066 - MIC94069) Dual High Side Power Switches
MIC94069	(MIC94066 - MIC94069) Dual High Side Power Switches
MIC94030	P-Channel MOSFET