Datasheet4U Logo Datasheet4U.com

SY88313BL - CML Low-Power Limiting Post Amplifier

Features

  • The SY88313BL low-power limiting post amplifier is.
  • Single 3.3V power supply designed for use in fiber-optic receivers. The device.
  • DC to 3.2Gbps operation connects to typical transimpedance amplifiers (TIAs). The linear signal output from TIAs can contain.
  • Low-noise CML data outputs significant amounts of noise and may vary in amplitude.
  • Chatter-free Open-Collector TTL loss-of-signal over time. The SY88313BL quantizes these signals and (LOS) output with inte.

📥 Download Datasheet

Datasheet Details

Part number SY88313BL
Manufacturer Micrel Semiconductor
File Size 408.62 KB
Description CML Low-Power Limiting Post Amplifier
Datasheet download datasheet SY88313BL Datasheet

📁 Similar Datasheet

  • SY88303BL - 3.2 Gbps CML Limiting Post Amplifier (Microchip)
  • SY88343BL - 3.2 Gbps CML Limiting Post Amplifier (Microchip)
  • SY8801 - Bluetooth headset smart charging case solution (TPS)
  • SY8802 - Bluetooth headset smart charging case solution (TPS)
  • SY8803 - Bluetooth headset smart charging case solution (TPS)
  • SY8805A - 5A Synchronous Step Down Regulator (Silergy)
  • SY8810 - Bluetooth headset smart charging case solution (TPS)
  • SY8812 - Bluetooth headset charging case solution (TPS)
  • SY88149HL - 3.3V 1.25Gbps Burst-Mode Limiting Amplifier (MICREL)
  • SY8815 - Bluetooth headset charging case solution (TPS)
Other Datasheets by Micrel Semiconductor
  • SY88315BL - CML Low-Power Limiting Post Amplifier w/TTL Signal Detect
  • SY88309BL - 3.2Gbps PECL Limiting Post Amplifier
  • SY88343BL - CML Limiting Post Amplifier
  • SY88343DL - CML Limiting Post Amplifier
  • SY88345BL - CML Low-Power Limiting Post Amplifier w/ High-Gain TTL Signal Detect
  • SY88347DL - PECL Limiting Post Amplifier
  • SY88353BL - Limiting Post Amplifier
  • SY88022AL - 11.3Gbps Laser Diode Driver

Full PDF Text Transcription

Click to expand full text
SY88313BL 3.3V, 3.2Gbps CML Low-Power Limiting Post Amplifier with TTL Loss-of-Signal General Description Features The SY88313BL low-power limiting post amplifier is • Single 3.3V power supply designed for use in fiber-optic receivers. The device • DC to 3.2Gbps operation connects to typical transimpedance amplifiers (TIAs). The linear signal output from TIAs can contain • Low-noise CML data outputs significant amounts of noise and may vary in amplitude • Chatter-free Open-Collector TTL loss-of-signal over time. The SY88313BL quantizes these signals and (LOS) output with internal 4.75kΩ pull-up outputs CML-level waveforms. resistor The SY88313BL operates from a single +3.3V ±10% • TTL /EN input supply, over temperatures ranging from –40°C to +85°C.
Published: |