Datasheet4U Logo Datasheet4U.com

SY88403BL - CML Low-Power Limiting Post Amplifier

Description

The SY88403BL is a low-power limiting post amplifier optimized for copper applications.

The device connects to typical transimpedance amplifiers (TIAs).

The linear signal output from TIAs can contain significant amounts of noise and may vary in amplitude over time.

Features

  • Multi-rate up to 4.25Gbps operation.
  • 5mVPP input sensitivity.
  • Low noise 50Ω CML data outputs.
  • 800mVpp output swing.
  • 60ps edge rates.
  • 1psRMS typ. random jitter.
  • 10psPP typ. deterministic jitter.
  • Chatter-free Loss-of-Signal (LOS) output.
  • 3.5dB electrical hysteresis.
  • OC-TTL output with internal 4.75kΩ pull-up resistor.
  • Programmable LOS sensitivity using single external resistor.
  • Internal 50Ω.

📥 Download Datasheet

Datasheet Details

Part number SY88403BL
Manufacturer Micrel Semiconductor
File Size 460.60 KB
Description CML Low-Power Limiting Post Amplifier
Datasheet download datasheet SY88403BL Datasheet

📁 Similar Datasheet

  • SY88403BL - 3.3V 4.25 Gbps CML Low-Power Limiting Post Amplifier (Microchip)
  • SY8843 - Ultra Fast Dynamic Response Synchronous Step Down Regulator (Silergy)
  • SY8843L - Ultra Fast Dynamic Response Synchronous Step Down Regulator (Silergy)
  • SY8801 - Bluetooth headset smart charging case solution (TPS)
  • SY8802 - Bluetooth headset smart charging case solution (TPS)
  • SY8803 - Bluetooth headset smart charging case solution (TPS)
  • SY8805A - 5A Synchronous Step Down Regulator (Silergy)
  • SY8810 - Bluetooth headset smart charging case solution (TPS)
  • SY8812 - Bluetooth headset charging case solution (TPS)
  • SY88149HL - 3.3V 1.25Gbps Burst-Mode Limiting Amplifier (MICREL)
Other Datasheets by Micrel Semiconductor
  • SY88432L - 4.25 Gbps Transceiver
  • SY88022AL - 11.3Gbps Laser Diode Driver
  • SY88022L - 11.3Gbps Laser Diode Driver
  • SY88024L - 11.3Gbps VCSEL DRIVER
  • SY88053AL - 12.5Gbps Limiting Post Amplifier
  • SY88063AL - 12.5Gbps Limiting Post Amplifier
  • SY88147DL - PECL Limiting Post Amplifier w/High Gain TTL Loss-of-Signal
  • SY88149CL - PECL Limiting Post Amplifier

Full PDF Text Transcription

Click to expand full text
SY88403BL 3.3V 4.25Gbps CML Low-Power Limiting Post Amplifier with TTL LOS General Description The SY88403BL is a low-power limiting post amplifier optimized for copper applications. The device connects to typical transimpedance amplifiers (TIAs). The linear signal output from TIAs can contain significant amounts of noise and may vary in amplitude over time. The SY88403BL quantizes these signals and outputs typically 800mVPP voltage-limited waveforms. The SY88403BL operates from a single +3.3V ±10% power supply, over an industrial temperature range of –40°C to +85°C. With its wide bandwidth and high gain, signals with data rates up to 4.25Gbps and as small as 5mVPP can be amplified to drive devices with CML inputs or AC-coupled PECL inputs.
Published: |