Datasheet4U Logo Datasheet4U.com

SY88782L - Low Power Laser Driver

Description

The SY88782L is a single supply 3.3V low power consumption, small-form factor, driver for telecom/datacom applications using FP/DFB lasers at data rates up to 1.25Gbps.

Features

  • 2.3V minimum laser compliance voltage.
  • 48mA power supply current typical.
  • Operation up to 1.25Gbps.
  • Modulation current up to 90mA.
  • Designed for use with the MIC3003.
  • Small form factor 3mm x 3mm QFN package.

📥 Download Datasheet

Datasheet Details

Part number SY88782L
Manufacturer Micrel Semiconductor
File Size 635.95 KB
Description Low Power Laser Driver
Datasheet download datasheet SY88782L Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SY8801 Bluetooth headset smart charging case solution TPS
SY8802 Bluetooth headset smart charging case solution TPS
SY8803 Bluetooth headset smart charging case solution TPS
SY8805A 5A Synchronous Step Down Regulator Silergy
SY8810 Bluetooth headset smart charging case solution TPS

Other Datasheets by Micrel Semiconductor

Part Number Description
SY88702 LASER DIODE DRIVER
SY88703V PECL LOW-POWER LIMITING POST AMPLIFIER W/TTL LOS
SY88713V PECL LOW-POWER LIMITING POST AMPLIFIER W/PECL SIGNAL DETECT
SY88722V LASER DIODE DRIVER
SY88773V CML LOW-POWER LIMITING POST AMPLIFIER W/TTL SD

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SY88782L 3.3V, 1.25Gbps High-Current, Low-Power Laser Driver for Datacom Telecom Applications General Description The SY88782L is a single supply 3.3V low power consumption, small-form factor, driver for telecom/datacom applications using FP/DFB lasers at data rates up to 1.25Gbps. The driver can deliver modulation current up to 90mA, and the high compliance voltage it offers makes the part suitable for high-current operation (with the laser AC- or DCcoupled to it.) This device is intended to be used with Micrel MIC3003 Optical Transceiver Management IC which allows for modulation and bias currents control and monitoring, automatic power Control, and temperature compensation. All support documentation can be found on Micrel’s web site at: www.micrel.com. Features • 2.
Published: |