Datasheet4U Logo Datasheet4U.com

ML5800 - FSK Transceiver

Datasheet Summary

Description

The ML5800 is a high integration 5.8GHz Frequency Shift Keyed (FSK) transceiver that integrates all frequency generation, receive, and transmit functions required to realize a digital cordless telephone.

Features

  • ES High Integration 5.8GHz FSK Transceiver High data rate - 1.536Mbps Low-IF receiver eliminates external IF filters Fully integrated IF filters, FM discriminator, and data filters Self-calibrated filters eliminate production tuning 4dB (typ) Input-referred Noise Figure -94dBm (typ) sensitivity @ 0.1% BER 0dBm (typ) Output Power Simple 3-wire Control Interface PA sequencing & integrated pin diode driver Analog RSSI output over a 68dB range Auxiliary switch for transmit power control Space saving.

📥 Download Datasheet

Datasheet preview – ML5800

Datasheet Details

Part number ML5800
Manufacturer Micro Linear
File Size 698.25 KB
Description FSK Transceiver
Datasheet download datasheet ML5800 Datasheet
Additional preview pages of the ML5800 datasheet.

📁 Similar Datasheet

  • ML5805 - 5.8GHz Variable Data Rate FSK Transceiver (RF Micro Devices)
  • ML5824 - ML5824 2.4GHz to 5.8GHz Frequency Translator (Micro Linear Corporation)
  • ML5825 - 2.4GHz to 5.8GHz Frequency Translator (SIRENZA MICRODEVICES)
  • ML58C88 - CMOS BTL Drivers (Minilogic Device Corporation)
  • ML501 - 1.9-2.7 GHz High IP3 Mixer (WJ Communication)
  • ML501P73 - LASER DIODES (Mitsubishi Electric Semiconductor)
  • ML5041-HD-YG-C - HOLE LED (MIC)
  • ML5206 - Cell Li-ion Rechargeable Battery Protection IC (LAPIS)
  • ML520G54 - LASER DIODES (Mitsubishi)
  • ML5233 - Cell Li-ion Rechargeable Battery Protection IC (LAPIS)
Other Datasheets by Micro Linear

    Full PDF Text Transcription

    Click to expand full text
    www.DataSheet4U.com ML5800 5.8GHz Low-IF 1.5Mbps FSK Transceiver FINAL Datasheet GENERAL DESCRIPTION The ML5800 is a high integration 5.8GHz Frequency Shift Keyed (FSK) transceiver that integrates all frequency generation, receive, and transmit functions required to realize a digital cordless telephone. Only a power amplifier (PA) and antenna switch are required to form a complete 5.8GHz digital radio. The ML5800 operates in the 5.725 to 5.850 GHz unlicensed ISM band. It can be used to implement both Direct Sequence and Frequency Hopping Spread Spectrum radios. The ML5800 contains a dual-conversion low-IF receiver with all channel selectivity on chip. IF filtering, IF gain, and demodulation are performed on chip eliminating the need for any external IF filters or production tuning.
    Published: |