LF514RU Datasheet PDF - MicroPowerDirect 5W SMT Single & Dual Output DC/DC Converters Specs

LF514RU - 5W SMT Single & Dual Output DC/DC Converters

This page provides the datasheet information for the LF514RU, a member of the LF500RU 5W SMT Single & Dual Output DC/DC Converters family.

Datasheet Summary

Features

5W Output Power.
Wide 4:1 Inputs.
Miniature SMT Case.
Tight Line/Load Regulation.
1,500 VDC Isolation.
-40ºC to +71ºC Operation.
14 Standard Models.
1.0 MH MTBF Minimum.
Industry Standard Pin-Out Parameter Input Start Voltage Reverse Polarity Input Current Short Circuit Input Power Input Filter Conditions 24 VDC Input 48 VDC Input Max. 9.0 18.0 1.0 1,000 3,000 ␲ (Pi) Filter (Meets EN55022 Class A) Min. Typ. ±0.

Datasheet Details

Part number	LF514RU
Manufacturer	MicroPowerDirect
File Size	234.16 KB
Description	5W SMT Single & Dual Output DC/DC Converters
Datasheet	LF514RU Datasheet
Additional preview pages of the LF514RU datasheet.

📁 Similar Datasheet

LF505-S - Current Transducer (LEM)

LF50AB - Very low drop voltage regulator (STMicroelectronics)

LF50AC - Very low drop voltage regulator (STMicroelectronics)

LF50C - Very low drop voltage regulator (STMicroelectronics)

LF52AB - VERY LOW DROP VOLTAGE REGULATORS (STMicroelectronics)

LF52C - VERY LOW DROP VOLTAGE REGULATORS (STMicroelectronics)

LF55AB - VERY LOW DROP VOLTAGE REGULATORS (STMicroelectronics)

LF55C - VERY LOW DROP VOLTAGE REGULATORS (STMicroelectronics)

LF59EMBGMBC - T-1 3/4 (5mm) FULL COLOR RGB LED LAMPS (ETC)

LF59EMBGMBW - T-1 3/4 (5mm) FULL COLOR RGB LED LAMPS (ETC)

Full PDF Text Transcription

Click to expand full text

LF500RU Series Very Wide Input, 5W SMT Single & Dual Output DC/DC Converters Electrical Speciﬁcations Speciﬁcations typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Speciﬁcations subject to change without notice. Input Key Features: • 5W Output Power • Wide 4:1 Inputs • Miniature SMT Case • Tight Line/Load Regulation • 1,500 VDC Isolation • -40ºC to +71ºC Operation • 14 Standard Models • 1.0 MH MTBF Minimum • Industry Standard Pin-Out Parameter Input Start Voltage Reverse Polarity Input Current Short Circuit Input Power Input Filter Conditions 24 VDC Input 48 VDC Input Max. 9.0 18.0 1.0 1,000 3,000 ␲ (Pi) Filter (Meets EN55022 Class A) Min. Typ. ±0.5 ±0.5 ±0.2 ±0.3 50 Max. ±2.0 ±3.0 ±1.0 ±1.0 85 100 15 500 ±6 ±0.02 Min. 7.0 14.0 Typ. 8.0 16.

Published: May 5, 2014 |