24FC64F Datasheet | Microchip Technology

Features - Single-Supply with Operation Down to 1.7V for 24AA64F/24FC64F Devices, 2.5V for 24LC64F Devices - Low-Power CMOS Technology: - Read current 400 A, max. - Standby current 1 A, max. (I-temp) - Two-Wire Serial Interface, I2C patible - Packages with Three Address Pins are Cascadable up to Eight Devices - Schmitt Trigger Inputs for Noise Suppression - Output Slope Control to Eliminate Ground Bounce - 100 k Hz and 400 k Hz Clock patibility - 1 MHz Clock for FC Versions - Page Write Time 5 ms, Maximum - Self-timed Erase/Write Cycle - 32-Byte Page Write Buffer - Hardware Write-Protect for 1/4 Array (1800h-1FFFh) - High Reliability: - More than one million erase/write cycles - Data retention > 200 years - ESD protection > 4,000V - Factory Programming Available - Ro HS pliant - Temperature Ranges: - Industrial (I): -40°C to +85°C - Extended (E): -40°C to +125°C Description The Microchip Technology Inc. 24AA64F/24LC64F/ 24FC64F (24XX64F(1)) is a 64-Kbit Electrically Erasable PROM. The device is organized as a single block of 8K x 8-bit memory with a Two-Wire serial interface. Low-voltage design permits operation down to 1.7V, with standby and read currents of only 1 A and 400 A, respectively. It has been developed for advanced, low-power applications such as personal munications or data acquisition. The 24XX64F also has a page write capability of up to 32 bytes of data. Functional address lines allow up to eight devices on the same bus, for up to 512 Kbits address space. Note 1: 24XX64F is used in this document as a generic part number for the 24AA64F/ 24LC64F/24FC64F devices Package Types PDIP/MSOP/SOIC/TSSOP SOT-23 A0 1 8 VCC SCL 1 5 WP A1 2 A2 3 VSS 4 6 SCL SDA 3 5...