Microchip Technology ATmegaS128
The ATmegaS128 is a low-power CMOS 8-bit microcontroller based on the AVR® enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmegaS128 achieves throughputs close to 1 MIPS per MHz. This empowers system designers to optimize the device for power consumption versus processing speed.FEATURES
● High-performance, Low-power AVR 8-bit Microcontroller● Advanced RISC Architecture – 133 Powerful Instructions - Most Single-clock Cycle Execution – 32 × 8 General Purpose Working Registers + Peripheral Control Registers – Fully Static Operation – Up to 8MIPS Throughput at 8MHz – On-chip 2-cycle Multiplier
● High Endurance Non-volatile Memory segments – 128KBytes of In-System Self-programmable Flash program memory – 4KBytes EEPROM – 4KBytes Internal SRAM – Write/Erase cycles: 10k Flash(1) / 20k EEPROM – Data retention: 10 years @ 125°C – Optional Boot Code Section with Independent Lock Bits
● In-System Programming by On-chip Boot Program
● True Read-While-Write Operation – Up to 64 KBytes Optional External Memory Space – Programming Lock for Software Security – SPI Interface for In-System Programming
● JTAG (IEEE std. 1149.1 Compliant) Interface – Boundary-scan Capabilities According to the JTAG Standard – Extensive On-chip Debug Support – Programming of Flash, EEPROM, Fuses...