ATxmega8E5 Datasheet | Microchip Technology

ATxmega32E5/16E5/8E5 XMEGA® E5 Data Sheet Introduction The AVR® XMEGA® E5 is a family of low power, high performance, and peripheral rich 8/16-bit microcontrollers based on the AVR enhanced RISC architecture. The XMEGA E5 is a 32-pins device ranging from 8KB to 32KB Flash, with 1KB to 4KB SRAM, 512Bytes to 1KB EEPROM and up to 4KB boot section. The ATxmega E5 devices operate at a maximum frequency of 32MHz. By executing instructions in a single clock cycle, the devices achieve CPU throughput approaching one million instructions per second (MIPS) per megahertz, allowing the system designer to optimize power consumption versus processing speed. Features - High-performance, low-power AVR® XMEGA® 8/16-bit Microcontroller - Nonvolatile program and data memories - 8K - 32KB of in-system self-programmable flash - 2K - 4KB boot section - 512Bytes - 1KB EEPROM - 1K - 4KB internal SRAM - Peripheral Features - Four-channel enhanced DMA controller with 8/16-bit address match - Eight-channel event system - Asynchronous and synchronous signal routing - Quadrature encoder with rotary filter - Three 16-bit timer/counters - One timer/counter with four output pare or input capture channels - Two timer/counter with two output pare or input capture channels - High resolution extension enabling down to 4ns PWM resolution - Waveform extension for control of motor, LED, lighting, H-bridge, high drives, and more - Fault extension for safe and deterministic handling and/or shut-down of external driver - CRC-16 (CRC-CCITT) and CRC-32 (IEEE 802.3) generator - XMEGA Custom Logic (XCL) module with timer, counter and logic functions - Two 8-bit timer/counters with capture/pare and 16-bit cascade mode - Connected to one USART to support custom data frame...