DSA1123 Datasheet | Microchip Technology

Features - Automotive AEC-Q100 Qualified - Wide Frequency Range: 2.3 MHz to 460 MHz (LVDS) - Low RMS Phase Jitter: <1 ps (typ.) - High Stability: ±20 ppm, ±25 ppm, ±50 ppm - Wide Temperature Range: - Automotive Grade 1: - 40°C to +125°C - Automotive Grade 2: - 40°C to +105°C - Automotive Grade 3: - 40°C to +85°C - High Supply Noise Rejection: - 50 d Bc - Small Industry Standard Footprints - 2.5 mm x 2.0 mm (VDFN) - 3.2 mm x 2.5 mm (VDFN & Wettable Flank) - 5.0 mm x 3.2 mm (CDFN) - Excellent Shock and Vibration Immunity - Qualified to MIL-STD-883 - High Reliability - 20x Better MTBF than Quartz Oscillators - Low Current Consumption - Supply Range of 2.25 to 3.63V - Standby and Output Enable Function - Lead-Free and Ro HS pliant Applications - Automotive Infotainment - Automotive ADAS - In-Vehicle Networking - Autonomous Driving General Description The DSA1103 and DSA1123 series of high performance oscillators utilize a proven silicon MEMS technology to provide excellent jitter and stability over a wide range of supply voltages and temperatures. By eliminating the need for quartz or SAW technology, MEMS oscillators significantly enhance reliability and accelerate product development, while meeting stringent clock performance criteria for a variety of automotive applications like in-vehicle networking and autonomous driving. DSA1103 has a standby feature that allows it to pletely power-down when pin 1 is pulled low. For DSA1123, only the outputs are disabled when pin 1 is low. Both oscillators are available in industry standard packages, including the small 2.5 mm x 2.0 mm, and are drop-in replacements for standard 6-pin LVDS crystal oscillators. The wettable flank package improves solderability and visual inspection. Functional Block Diagram Pin 1 OE/STDBY/FS DIGITAL CONTROL Pin 2 NC Pin 3...