HV232 Datasheet | Microchip Technology

Features - 10 µA Maximum Quiescent Power Dissipation - 22Ω Typical Output On-resistance - Integrated Bleed Resistors on the Outputs - Low Parasitic Capacitance - DC to 50 MHz Small Signal Frequency Response - - 60 d B Typical Off-isolation at 5 MHz - CMOS Logic Circuitry for Low Power - Excellent Noise Immunity - On-chip Shift Register, Latch and Clear Logic Circuitry - Flexible High-voltage Supplies Applications - Medical Ultrasound Imaging - Piezoelectric Transducer Drivers General Description The HV232 is an 8-channel, low-charge-injection, high-voltage, analog switch integrated circuit (IC) with bleed resistors. This device can be used in applications requiring high-voltage switching controlled by low-voltage control signals, such as ultrasound imaging and printers. The bleed resistors eliminate voltage built up on capacitive loads, such as piezoelectric transducers. Input data is shifted into an 8-bit Shift register which can be retained in an 8-bit latch. To reduce any possible clock feed-through noise, latch enable (LE) should be left high until all bits are clocked in. This switch bines high-voltage bilateral DMOS switches and low-power CMOS logic to provide efficient control of high-voltage analog signals. The HV232 is suitable for various binations of high -voltage supplies, e.g., VPP/VNN: +40V/- 160V and +100V/- 100V, and +160V/- 40V. Package Types 48-lead LQFP (Top view) 48 1 28-lead PLCC (Top view) 1 28 26 See Table 2-1 and Table 2-2 for pin information.  2024 Microchip Technology Inc. and its subsidiaries DS20005820A-page 1 Functional Block Diagram 8-Bit Shift Register DOUT Latches D LE CLR Level Shifters Output...