MCP14A0154 Datasheet | Microchip Technology

Features - High Peak Output Current: 1.5A (typical) - Wide Input Supply Voltage Operating Range: - 4.5V to 18V - Low Shoot-Through/Cross-Conduction Current in Output Stage - High Capacitive Load Drive Capability: - 1000 p F in 11.5 ns (typical) - Short Delay Times: 25 ns (t D1), 24 ns (t D2) (typical) - Low Supply Current: 750 µA (typical) - Low-Voltage Threshold Input and Enable with Hysteresis - Latch-up Protected: Withstands 500 m A Reverse Current - Space-Saving Packages: - 8-Lead MSOP - 8-Lead SOIC - 8-Lead 2x3 TDFN Applications - Switch-Mode Power Supplies (SMPS) - Pulse Transformer Drive - Line Drivers - Level Translator - Motor and Solenoid Drive Package Types MSOP/SOIC MCP14A0153 MCP14A0155 EN A 1 IN A 2 GND 3 IN B 4 8 EN B 7 OUT A 6 VDD 5 OUT B OUT A OUT B OUT A OUT B General Description The MCP14A0153/4/5 devices are high-speed dual MOSFET drivers that are capable of providing up to 1.5A of peak current while operating from a single 4.5V to 18V supply. There are three output configurations available: dual inverting (MCP14A0153), dual non-inverting (MCP14A0154) and plementary (MCP14A0155). These devices feature low shoot-through current, matched rise and fall times and short propagation delays, which make them ideal for high switching frequency applications. The MCP14A0153/4/5 family of devices offers enhanced control with enable functionality. The active-high enable pins can be driven low to drive the corresponding outputs of the MCP14A0153/4/5 low, regardless of the status of the input pin. An integrated pull-up resistor allows the user to leave the enable pins floating for standard operation. These devices are highly latch-up resistant under any condition within their power and voltage ratings. They can accept up to 500 m A of reverse current being forced back into their outputs without damage or logic upset. All terminals are fully protected against Electrostatic Discharge (ESD), up to 2 k V (HBM) and 200 V (MM). 2×3 TDFN- MCP14A0153...