Microchip Technology MCP16362
the MCP16362 runs in PWM-only mode, and is recommended for applications in which the low-frequency component associated with PFM mode of operation is not desirable. This is achieved by sweeping the switching frequency over a 10% range above the 2.2 MHz nominal value. The Power Good output pin will go from logic low to logic high (through an external pull-up resistor) once the output voltage is within 93% of the nominal set point.| Part No. | MCP16362 |
|---|---|
| Datasheet | MCP16362 Download |
| Manufacturer |  Microchip Technology |
| Description | Integrated Switch Step-Down Regulator |
| Buy | Stock & Price |
FEATURES
● Input Voltage Range: 4.0V to 48V● Adjustable Output Voltage Range: 2.0V to 24V
● Integrated N-Channel Buck Switch: 100 m
● 3A Output Current
● 2.2 MHz Fixed Frequency
● Shutdown Current: 5 µA typical
● Quiescent Current: 18 µA typical (not switching)
● Device Selectable Switching Mode - Automatic Pulse Frequency Modulation/ Pulse Width Modulation (PFM/PWM) Operation - MCP16361 - PWM only Mode of Operation - MCP16362 - PWM only Mode of Operation with Switching Frequency Dithering for EMI constrained applications - MCP16363
● Power Good Output
● Undervoltage Lockout (UVLO)
● Peak Current Mode Control
● Internal Compensation
● Internal Soft-Start
● Internal Bootstrap Diode
● Cycle-by-Cycle Peak Current Limit
● Overtemperature Protection
● Available Package: 8-lead 3x3 mm wettable flanks VDFN (see Package Type)
● Passes Automotive AEC-Q100 Reliability Testing
APPLICATIONS
● Automotive DC/DC and 48V Systems● Microcontroller Bias Supply
● 24V Industrial Input DC-DC Conversion
●...
