MCP19111
MCP19111 is Digitally-Enhanced Power Analog Controller manufactured by Microchip Technology.
- Part of the MCP19110 comparator family.
- Part of the MCP19110 comparator family.
Features
- Input Voltage: 4.5V to 32V
- Output Voltage: 0.5V to 3.6V
- Greater than 3.6V requires external divider
- Switching Frequency: 100 k Hz to 1.6 MHz
- Quiescent Current: 5 m A Typical
- High-Drive:
- +5V Gate Drive
- 1A/2A Source Current
- 1A/2A Sink Current
- Low-Drive:
- +5V Gate Drive
- 2A Source Current
- 4A Sink Current
- Peak Current Mode Control
- Differential Remote Output Sense
- Multi-Phase Systems:
- Master or Slave
- Frequency Synchronized
- mon Error Signal
- Multiple Output Systems:
- Master or Slave
- Frequency Synchronized
- AEC-Q100 Qualified
- Configurable Parameters:
- Overcurrent Limit
- Input Undervoltage Lockout
- Output Overvoltage
- Output Undervoltage
- Internal Analog pensation
- Soft Start Profile
- Synchronous Driver Dead Time
- Switching Frequency
- Thermal Shutdown
Microcontroller Features
- Precision 8 MHz Internal Oscillator Block:
- Factory Calibrated
- Interrupt Capable
- Firmware
- Interrupt-on-Change...
