Datasheet4U Logo Datasheet4U.com

MCP37D31-200 - 16-/14-Bit Low-Power ADC

This page provides the datasheet information for the MCP37D31-200, a member of the MCP37231-200 16-/14-Bit Low-Power ADC family.

Description

The MCP37231/21-200 is Microchip's baseline 16-/14bit 200 Msps pipelined ADC family, featuring built-in high-order digital decimation filters, gain and offset adjustment per channel and fractional delay recovery.

Features

  • Sample Rates: - 200 Msps for single-channel mode - 200 Msps/number of channels used.
  • SNR with fIN = 15 MHz and -1 dBFS: - 74.7 dBFS (typical) at 200 Msps.
  • SFDR with fIN = 15 MHz and -1 dBFS: - 90 dBc (typical) at 200 Msps.
  • Power Dissipation with LVDS Digital I/O: - 490 mW at 200 Msps.
  • Power Dissipation with CMOS Digital I/O: - 436 mW at 200 Msps, Output Clock = 100 MHz.
  • Power Dissipation Excluding Digital I/O: - 390 mW at 200 Msps.

📥 Download Datasheet

Datasheet preview – MCP37D31-200

📁 Similar Datasheet

  • MCP37D10-200 - 12-Bit Low-Power Single-Channel ADC (Microchip Technology)
  • MCP37D20-200 - 14-Bit Low-Power Single-Channel ADC (Microchip Technology)
  • MCP37210-200 - 12-Bit Low-Power Single-Channel ADC (Microchip Technology)
  • MCP37220-200 - 14-Bit Low-Power Single-Channel ADC (Microchip Technology)
  • MCP3001 - 2.7V 10-Bit A/D Converter (Microchip Technology)
  • MCP3002 - 2.7V Dual Channel 10-Bit A/D Converter (Microchip Technology)
  • MCP3004 - 2.7V 4-Channel/8-Channel 10-Bit A/D Converters (Microchip Technology)
  • MCP3008 - 2.7V 4-Channel/8-Channel 10-Bit A/D Converters (Microchip Technology)
  • MCP3009 - (MCP3009 - MCP3011) NON Zero Crossing Triacs (General Instrument Optoelectronics)
  • MCP300X - MCP300X 10-Bit Analog-to-Digital Converters (Microchip Technology)
Other Datasheets by Microchip

Full PDF Text Transcription

Click to expand full text
MCP37231/21-200 MCP37D31/21-200 200 Msps, 16/14-Bit Low-Power ADC with 8-Channel MUX Features • Sample Rates: - 200 Msps for single-channel mode - 200 Msps/number of channels used • SNR with fIN = 15 MHz and -1 dBFS: - 74.7 dBFS (typical) at 200 Msps • SFDR with fIN = 15 MHz and -1 dBFS: - 90 dBc (typical) at 200 Msps • Power Dissipation with LVDS Digital I/O: - 490 mW at 200 Msps • Power Dissipation with CMOS Digital I/O: - 436 mW at 200 Msps, Output Clock = 100 MHz • Power Dissipation Excluding Digital I/O: - 390 mW at 200 Msps • Power-Saving Modes: - 144 mW during Standby - 28 mW during Shutdown • Supply Voltage: - Digital Section: 1.2V, 1.8V - Analog Section: 1.2V, 1.8V • Selectable Full-Scale Input Range: up to 2.
Published: |