datasheet4u.com

900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




  Microchip Technology Semiconductor Electronic Components Datasheet  

MCP3910 Datasheet

3V Two-Channel Analog Front End

No Preview Available !

MCP3910 pdf
MCP3910
3V Two-Channel Analog Front End
Features:
• Two Synchronous Sampling 24-bit Resolution
Delta-Sigma A/D Converters
• 93.5 dB SINAD, -107 dBc Total Harmonic
Distortion (THD) (up to 35th harmonic), 112 dB
Spurious-Free Dynamic Range (SFDR) for Each
Channel
• Flexible Serial Interface that Includes Both SPI
and a Simple 2-Wire Interface Ideal for Polyphase
Shunt Energy Meters
• Enables 0.1% Typical Active Power Measurement
Error over a 10,000:1 Dynamic Range
• Advanced Security Features:
- 16-bit Cyclic Redundancy Check (CRC)
Checksum on All Communications for Secure
Data Transfers
- 16-bit Cyclic Redundancy Check (CRC)
Checksum and Interrupt Alert for Register-
Map Configuration
- Register-Map Lock with 8-bit Secure Key
• 2.7V – 3.6V AVDD, DVDD
• Programmable Data Rate, up to 125 ksps:
- 4 MHz Maximum Sampling Frequency
- 16 MHz Maximum Master Clock
• Oversampling Ratio, up to 4096
• Ultra Low-Power Shutdown Mode with < 10 µA
• -122 dB Crosstalk between Channels
• Low Drift 1.2V Internal Voltage Reference:
9 ppm/°C
• Differential Voltage Reference Input Pins
• High-Gain Programmable Gain Amplifier (PGA)
on Each Channel (up to 32 V/V)
• Phase Delay Compensation with 1 µs Time
Resolution
• Separate Data Ready Pin for Easy
Synchronization
• Individual 24-bit Digital Offset and Gain Error
Correction for Each Channel
• High-Speed 20 MHz SPI Interface with Mode 0,0
and 1,1 Compatibility
• Continuous Read/Write Modes for Minimum
Communication with Dedicated 16-/32-bit Modes
• Available in 20-lead QFN and SSOP Packages
• Extended Temperature Range: -40°C to +125°C
(All Specifications are Valid Down to -45°C
Operation)
Description:
The MCP3910 is a 3V two-channel Analog Front End
(AFE), containing two synchronous sampling delta-
sigma, Analog-to-Digital Converters (ADC), two
programmable gain amplifiers (PGA), phase delay
compensation block, low-drift internal voltage
reference, digital offset and gain errors calibration
registers, and high-speed 20 MHz SPI-compatible
serial interface.
The MCP3910 ADCs are fully configurable with
features such as: 16-/24-bit resolution, Oversampling
Ration (OSR) from 32 to 4096, gain from 1x to 32x,
independent Shutdown and Reset, dithering and auto-
zeroing. Communication is largely simplified with 8-bit
commands, including various continuous read/write
modes and 16-/24-/32-bit data formats that can be
accessed by the Direct Memory Access (DMA) of an
8-/16- or 32-bit MCU, and with the separate data ready
pin that can directly be connected to an Interrupt
Request (IRQ) input of an MCU.
The MCP3910 includes advanced security features to
secure the communications and the configuration
settings, such as a CRC-16 checksum on both serial
data outputs and on the static register map
configuration. It also includes a register-map lock
through an 8-bit password to stop unwanted write
commands from processing.
For polyphase shunt-based energy meters, the
MCP3910 2-Wire serial interface greatly reduces
system cost, requiring only a single bidirectional
isolator per phase.
The MCP3910 is capable of interfacing a variety of
voltage and current sensors, including shunts, current
transformers, Rogowski coils and Hall-effect sensors.
Applications:
• Single-Phase and Polyphase Energy Meters
• Energy Metering and Power Measurement
• Automotive
• Portable Instrumentation
• Medical and Power Monitoring
• Audio/Voice Recognition
• Isolated Sensor Applications
2012-2014 Microchip Technology Inc.
DS20005116B-page 1


  Microchip Technology Semiconductor Electronic Components Datasheet  

MCP3910 Datasheet

3V Two-Channel Analog Front End

No Preview Available !

MCP3910 pdf
MCP3910
Package Type
MCP3910
SSOP
RESET/OSR0
DVDD
AVDD
CH0+
CH0-
CH1-
CH1+
AGND
REFIN+/OUT
REFIN-
1
2
3
4
5
6
7
8
9
10
20 SDI/OSR1
19 SDO
18 SCK/MCLK
17 CS/BOOST
16 OSC2/MODE
15 OSC1/CLKI/GAIN0
14 DR/GAIN1
13 MDAT0
12 MDAT1
11 DGND
MCP3910
4 x 4 QFN*
20 19 18 17 16
CH0+ 1
15 SCK/MCLK
CH0- 2
CH1- 3
EP 14 CS/BOOST
21 13 OSC2/MODE
CH1+ 4
12 OSC1/CLKI/GAIN0
AGND 5
11 DR/GAIN1
6 7 8 9 10
* Includes Exposed Thermal Pad (EP); see Table 3-1.
Functional Block Diagram
REFIN+/OUT
REFIN-
CH0+
CH0-
CH1+
CH1-
Voltage
VREFEXT
Reference
+
V REF
-
AV DD
DV DD
AMCLK
DMCLK/DRCLK
Clock
Generation
Xtal Oscillator
MCLK
Vref- Vref+
ANALOG DIGITAL
+
-
PGA
+
-
PGA
SINC 3+
SINC 1
MOD<3:0>
OFFCAL_CH0
<23:0>
+
GAINCAL_CH0
<23:0>
X DATA_CH0
<23:0>
Modulator
MOD<7:4>
Modulator
SINC 3+
SINC 1
Phase
Shifter
PHASE <11:0>
OFFCAL_CH1 GAINCAL_CH1
<23:0>
<23:0>
+X
DATA_CH1
<23:0>
DMCLK
OSR<2:0>
PRE<1:0>
Digital
Interfaces
(SPI & 2-wire)
DUAL
ADC
EN_MDAT
MOD<7:0>
Modulator
Output Block
OSC1/CLKI/GAIN0
OSC2/MODE
DR/GAIN1
SDO
RESET/OSR0
SDI/OSR1
SCK
CS/BOOST
MDAT0
MDAT1
POR
AV DD
Monitoring
A GND
D GND
POR
DV DD
Monitoring
DS20005116B-page 2
2012-2014 Microchip Technology Inc.


Part Number MCP3910
Description 3V Two-Channel Analog Front End
Maker Microchip
Total Page 30 Pages
PDF Download
MCP3910 pdf
MCP3910 Datasheet PDF
[partsNo] view html
View PDF for Mobile








Similar Datasheet

1 MCP3910 3V Two-Channel Analog Front End Microchip
Microchip
MCP3910 pdf
2 MCP3911 3.3V Two-Channel Analog Front End Microchip
Microchip
MCP3911 pdf
3 MCP3912 3V Four-Channel Analog Front End Microchip
Microchip
MCP3912 pdf
4 MCP3913 3V Six-Channel Analog Front End Microchip
Microchip
MCP3913 pdf
5 MCP3914 3V Eight-Channel Analog Front End Microchip
Microchip
MCP3914 pdf
6 MCP3918 3V Single-Channel Analog Front End Microchip
Microchip
MCP3918 pdf
7 MCP3919 3V Three-Channel Analog Front End Microchip
Microchip
MCP3919 pdf





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy