Datasheet4U Logo Datasheet4U.com

MCP8021 - 3-Phase Brushless DC (BLDC) Motor Gate Driver

General Description

The MCP8021/2 devices are 3-phase Brushless DC (BLDC) power modules containing three integrated half-bridge drivers, capable of driving three external NMOS/NMOS transistor pairs.

Key Features

  • AEC-Q100 Grade 0 Qualified.
  • Three Half-Bridge Drivers Configured to Drive External High-Side NMOS and Low-Side NMOS MOSFETs: - Independent input control for high-side and low-side NMOS MOSFET gate drives - Typical peak output current: 0.5A @ 12V - Shoot-through protection - Overcurrent and short-circuit protection.
  • Three Operational Amplifiers (MCP8022).
  • Fixed Output Linear Regulator: - 3.3V or 5.0V @ 70 mA - True current foldback.
  • Supply Current: -.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MCP809 MCP809/MCP810 3-Pin Microprocessor Reset Circuits (Rev. A) ETCTI
MCP809 3-Pin Microprocessor Reset Circuits National
MCP810 MCP809/MCP810 3-Pin Microprocessor Reset Circuits (Rev. A) ETCTI
MCP810 3-Pin Microprocessor Reset Circuits National
MCP04N65 N-Channel MOSFET MCC

Other Datasheets by Microchip Technology

Part Number Description
MCP8022 3-Phase Brushless DC (BLDC) Motor Gate Driver
MCP8024 3-Phase Brushless DC (BLDC) Motor Gate Driver
MCP8025 3-Phase Brushless DC (BLDC) Motor Gate Driver
MCP8026 3-Phase Brushless DC (BLDC) Motor Gate Driver
MCP8063 3-Phase Brushless Sinusoidal Sensorless Motor Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MCP8021/2 3-Phase Brushless DC (BLDC) Motor Gate Driver with Power Module, Sleep Mode, Op Amps Features • AEC-Q100 Grade 0 Qualified • Three Half-Bridge Drivers Configured to Drive External High-Side NMOS and Low-Side NMOS MOSFETs: - Independent input control for high-side and low-side NMOS MOSFET gate drives - Typical peak output current: 0.5A @ 12V - Shoot-through protection - Overcurrent and short-circuit protection • Three Operational Amplifiers (MCP8022) • Fixed Output Linear Regulator: - 3.3V or 5.