Datasheet4U Logo Datasheet4U.com

MIC33M650 Datasheet Pin Strapping Power Module

Manufacturer: Microchip Technology

Overview: MIC33M650 6A, Pin Strapping Power Module with HyperLight Load® Mode and Output Voltage.

General Description

The MIC33M650 is a pin-selectable output voltage, high-efficiency, low-voltage input, 6A current, synchronous step-down regulator power module with integrated inductor.

The COT control architecture with HyperLight Load® mode provides very high efficiency at light loads, while still having an ultra-fast transient response.

The MIC33M650 output voltage is set by two VSEL (Voltage Selection) pins, between nine different values.

Key Features

  • 2.4V to 5.5V Input Voltage Range.
  • 6A Output Current.
  • Pin Strapping Voltage Selection: - Tri-state pins (nine voltage options) - 0.6V, 0.8V, 0.9V, 1.0V, 1.2V, 1.5V, 1.8V, 2.5V or 3.3V output voltage.
  • Reduced Component Count (No Feedback Resistors).
  • High Efficiency (up to 95%).
  • Output Discharge when Disabled.
  • Constant-On-Time (COT) Control with High Switching Frequency: - 1.2 MHz typical at 1.0V output voltage.
  • ±1.5% Output V.

More Datasheets from Microchip Technology

Part Number Description
MIC33M656 Power Module Buck Converter
MIC33M350 Pin Strapping Power Module
MIC33M356 Power Module Buck Converter
MIC33050 4MHz Internal Inductor PWM Buck Power Module
MIC33153 4MHz 1.2A Internal Inductor PWM Buck Regulator
MIC3172 1.25A Switching Regulators
MIC38300A Ultra-Low Noise 3A Power Module
MIC38C42 BiCMOS Current-Mode PWM Controllers
MIC38C43 BiCMOS Current-Mode PWM Controllers
MIC38C44 BiCMOS Current-Mode PWM Controllers

MIC33M650 Distributor