MIC841 Datasheet | Microchip Technology

Features - 1.5V to 5.5V Operating Range - 1.5 μA Typical Supply Current - ±1.25% Voltage Threshold Accuracy - 10 n A Maximum Input Leakage Current Over Temperature - 10 μs Propagation Delay - Externally Adjustable Hysteresis (MIC841) - Internal 20 m V Hysteresis (MIC842) - Output Options: - Push-Pull, Active-High - Push-Pull, Active-Low - Open-Drain, Active-Low - Open-Drain Output can be Pulled to 6V Regardless of VDD - Immune to Brief Input Transients - Teeny 5-Pin SC-70 Package - 6-Pin 1.6 mm x 1.6 mm TDFN (MIC841) - 4-Pin 1.2 mm x 1.6 mm TDFN (MIC842) Applications - Smartphones - PDAs - Precision Battery Monitoring - Battery Chargers General Description The MIC841 and MIC842 are micro-power, precision-voltage parators with an on-chip voltage reference. Both devices are intended for voltage monitoring applications. External resistors are used to set the voltage monitor threshold. When the threshold is crossed, the outputs switch polarity. The MIC842 incorporates a voltage reference and parator with fixed internal hysteresis; two external resistors are used to set the switching threshold voltage. The MIC841 provides a similar function with user adjustable hysteresis; this part requires three external resistors to set the upper and lower thresholds (the difference between the threshold voltages being the hysteresis voltage). Both the MIC841 and MIC842 are available with push-pull or open-drain output stage. The push-pull output stage is configured either active-high or active-low; the open-drain output stage is only configured active-low. Supply current is extremely low (1.5 μA, typical), making it ideal for portable applications. The MIC841/2 is supplied in the Teeny 5-pin SC-70, 6-pin 1.6 mm × 1.6 mm Thin DFN (MIC841), and 4-pin 1.2 mm × 1.6 mm Thin DFN (MIC842) packages. Package Types MIC841 SC-70-5 (C5) LTH GND HTH 3 21 Yxx MIC841 6-Pin TDFN (MT) LTH 1 6 OUT GND...