Datasheet4U Logo Datasheet4U.com

MTD6505 - 3-Phase Sinusoidal Sensorless Brushless Motor Driver

General Description

The MTD6505 device is a 3-phase, full-wave sensorless driver for brushless DC (BLDC) motors.

Key Features

  • 180° Sinusoidal Drive for High Efficiency and Low Acoustic Noise.
  • Position Sensorless BLDC Drivers (no Hall Effect Sensor required).
  • Integrated Power Transistors.
  • Supports 2V to 5.5V Power Supplies.
  • Programming Resistor (RPROG) Settings to Fit Motor Constant (KM) Range from 3.25 mV/Hz to 52 mV/Hz.
  • Direction Control: - Forward direction: connect DIR pin to GND or leave floating - Reverse direction: connect DIR pin to VBIAS or 3V.
  • Spe.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MTD655 5 Port 10M/100M Hub MYSON TECHNOLOGY
MTD658 8 Port 10M/100M Hub MYSON TECHNOLOGY
MTD658E 5/8 Port 10/100 Hub Build_in Bridge And Memory ETC
MTD6N10 TMOS POWER FET 6 AMPERES RDS(on) = 0.25 OHM 80 and 100 VOLTS Motorola
MTD6N10E TMOS POWER FET 6.0 AMPERES 100 VOLTS RDS(on) = 0.400 OHM Motorola

Other Datasheets by Microchip Technology

Part Number Description
MTD6501C 3-Phase Brushless DC Sinusoidal Sensorless Fan Motor Driver
MTD6501D 3-Phase Brushless DC Sinusoidal Sensorless Fan Motor Driver
MTD6501G 3-Phase Brushless DC Sinusoidal Sensorless Fan Motor Driver
MTD6502B 5V 3-Phase BLDC Sinusoidal Sensorless Fan Motor Driver
MTD6508 3-Phase Sinusoidal Sensorless Brushless DC Fan Motor Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MTD6505 3-Phase Sinusoidal Sensorless Brushless Motor Driver Features • 180° Sinusoidal Drive for High Efficiency and Low Acoustic Noise • Position Sensorless BLDC Drivers (no Hall Effect Sensor required) • Integrated Power Transistors • Supports 2V to 5.5V Power Supplies • Programming Resistor (RPROG) Settings to Fit Motor Constant (KM) Range from 3.