PD69200 Datasheet | Microchip Technology

feature set. The PD69200 is available for existing designs. The PD69210 and PS69220 are remended for all new designs. When paired with the Microchip PD69208T4, PD69204T4, or PD69208M Managers, the PD69200 controller is part of a Power over Ethernet Power Source Equipment (PSE) system. This system enables designers to integrate enhanced mode Po E capabilities, as specified in IEEE® 802.3af, IEEE 802.3at, IEEE 802.3bt, and Po H standards. The PD69200 is available in a 32-pin, 5 mm x 5 mm QFN package. Typical Po E Application The following figure shows the typical Po E application of PD69208T4 and PD69200 devices. Figure 1. Typical Po E Application Consult Microchip AN3361 Designing an IEEE 802.3af/802.3at/802.3bt-pliant PD69208 48-Port Po E System for plete reference design. © 2022 Microchip Technology Inc. and its subsidiaries DS00003460B-page 1 Features The following is the list of feature details of PSE Controller devices. - plies with IEEE 802.3 af/at, IEEE 802.3 bt, and HDBase T (POH) standards - Port matrix and priority - Cascade up to 12 Po E devices for 48 logical ports - 45 W maximum two pair power and capable of 90 W per four pair port (.bt) - Supports three power management modes: Class (LLDP), Dynamic, and Static - Supports 16 power banks based on four power supplies - Port power limit setting - Interrupt from power supply to Po E drivers - Interrupt out pin for system and port events - System OK indication - Disable ports input pin - System and port status and port measurements - Legacy detection support - LED stream support - Fast and perpetual Po E support - Software download through I2C or UART munication interface - 32-pin, 5 mm x 5 mm QFN package - Pin patible with PD69220 - MSL3 and Ro HS pliant © 2022 Microchip Technology Inc. and its subsidiaries DS00003460B-page 2 Table of Contents Introduction...