PIC16LF1567 Datasheet | Microchip Technology

Description The PIC16LF1566/1567 microcontrollers deliver unique on-chip features for the design of m Touch® solutions and general purpose applications in 28/40/44-pin count packages. Two 10-bit high-speed ADCs with automated hardware CVD modules connect up to 34 analog channels to achieve a total sampling rate of 600k samples per second. This family provides mutual capacitance output drivers on all analog channels, two PWMs, two MSSP modules with low input voltage options and one EUSART, which makes this family an excellent solution to implement low-power and noiserobust capacitive sensing and other front-end sampling applications with minimal software overhead. Core Features - C piler Optimized RISC Architecture - Only 49 Instructions - Operating Speed: - 0-32 MHz clock input - 125 ns minimum instruction cycle - Interrupt Capability - 16-Level Deep Hardware Stack - Up to Three 8-bit Timers - One 16-bit Timer - Power-on Reset (POR) - Power-up Timer (PWRT) - Low-Power Brown-Out Reset (LPBOR) - Programmable Watchdog Timer (WDT) up to 256s - Programmable Code Protection Memory - Up to 8k Words Flash Program Memory - 1024 Bytes Data SRAM Memory - Direct, Indirect and Relative Addressing modes Operating Characteristics - Operating Voltage Range: - 1.8V to 3.6V - Temperature Range: - Industrial: -40°C to 85°C - Extended: -40°C to 125°C e Xtreme Low-Power (XLP) Features - Sleep mode: 50 n A @ 1.8V, typical - Watchdog Timer: 500 n A @ 1.8V, typical - Operating Current: - 8 µA @ 32 k Hz, 1.8V, typical - 32 µA/MHz @ 1.8V, typical Digital Peripherals - PWM: Two 10-bit Pulse-Width Modulators - Output on up to five pins per PWM at the same time - Dual Master Synchronous Serial Port (MSSP) with SPI and I2C: - 7-bit address masking - SMBus/PMBus™ patibility - Configurable low input voltage threshold for I2C - Enhanced Universal Synchronous Asynchronous Receiver Transmitter...