900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




  Microchip Technology Semiconductor Electronic Components Datasheet  

PIC18LF24K50 Datasheet

High-Performance Microcontrollers

No Preview Available !

PIC18(L)F24/25K40
28-Pin, Low-Power, High-Performance Microcontrollers
with XLP Technology
Description
These PIC18(L)F24/25K40 microcontrollers feature Analog, Core Independent Peripherals and
Communication Peripherals, combined with eXtreme Low-Power (XLP) technology for a wide range of
general purpose and low-power applications. These 28 -pin devices are equipped with a 10-bit ADC with
Computation (ADCC) automating Capacitive Voltage Divider (CVD) techniques for advanced touch
sensing, averaging, filtering, oversampling and performing automatic threshold comparisons. They also
offer a set of Core Independent Peripherals such as Complementary Waveform Generator (CWG),
Windowed Watchdog Timer (WWDT), Cyclic Redundancy Check (CRC)/Memory Scan, Zero-Cross
Detect (ZCD) and Peripheral Pin Select (PPS), providing for increased design flexibility and lower system
cost.
Core Features
• C Compiler Optimized RISC Architecture
• Operating Speed:
– DC – 64 MHz clock input over the full VDD range
– 62.5 ns minimum instruction cycle
• Programmable 2-Level Interrupt Priority
• 31-Level Deep Hardware Stack
• Three 8-Bit Timers (TMR2/4/6) with Hardware Limit Timer (HLT)
• Four 16-Bit Timers (TMR0/1/3/5)
• Low-Current Power-on Reset (POR)
• Power-up Timer (PWRT)
• Brown-out Reset (BOR)
• Low-Power BOR (LPBOR) Option
• Windowed Watchdog Timer (WWDT):
– Watchdog Reset on too long or too short interval between watchdog clear events
– Variable prescaler selection
– Variable window size selection
– All sources configurable in hardware or software
Memory
• Up to 32K bytes Program Flash Memory
• Up to 2048 Bytes Data SRAM Memory
© 2017 Microchip Technology Inc.
Datasheet
40001843D-page 1


  Microchip Technology Semiconductor Electronic Components Datasheet  

PIC18LF24K50 Datasheet

High-Performance Microcontrollers

No Preview Available !

PIC18(L)F24/25K40
• 256 Bytes Data EEPROM
• Programmable Code Protection
• Direct, Indirect and Relative Addressing modes
Operating Characteristics
• Operating Voltage Ranges:
– 1.8V to 3.6V (PIC18LF24/25K40 )
– 2.3V to 5.5V ( PIC18F24/25K40)
• Temperature Range:
– Industrial: -40°C to 85°C
– Extended: -40°C to 125°C
Power-Saving Operation Modes
• Doze: CPU and Peripherals Running at Different Cycle Rates (typically CPU is lower)
• Idle: CPU Halted While Peripherals Operate
• Sleep: Lowest Power Consumption
• Peripheral Module Disable (PMD):
– Ability to selectively disable hardware module to minimize active power consumption of unused
peripherals
• Extreme Low-Power mode (XLP)
– Sleep: 500 nA typical @ 1.8V
– Sleep and Watchdog Timer: 900 nA typical @ 1.8V
eXtreme Low-Power (XLP) Features
• Sleep mode: 50 nA @ 1.8V, typical
• Windowed Watchdog Timer: 500 nA @ 1.8V, typical
• Secondary Oscillator: 500 nA @ 32 kHz
• Operating Current:
– 8 uA @ 32 kHz, 1.8V, typical
– 32 uA/MHz @ 1.8V, typical
Digital Peripherals
• Complementary Waveform Generator (CWG):
– Rising and falling edge dead-band control
– Full-bridge, half-bridge, 1-channel drive
– Multiple signal sources
• Capture/Compare/PWM (CCP) modules:
– Two CCPs
– 16-bit resolution for Capture/Compare modes
– 10-bit resolution for PWM mode
• 10-Bit Pulse-Width Modulators (PWM):
© 2017 Microchip Technology Inc.
Datasheet
40001843D-page 2


Part Number PIC18LF24K50
Description High-Performance Microcontrollers
Maker Microchip
Total Page 30 Pages
PDF Download

PIC18LF24K50 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 PIC18LF24K50 High-Performance Microcontrollers
Microchip





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy