SAM20G Datasheet | Microchip Technology

Features Operating Conditions - 1.62V - 3.63V, -40°C to +85°C, DC up to 48 MHz - 1.62V - 3.63V, -40°C to +105°C, DC up to 32 MHz - 2.7V - 3.63V, -40°C to +125°C Extended Temperature with pliance to AEC-Q100, DC up to 32MHz Core - Arm® Cortex®-M0+ CPU running at up to 48 MHz - Single-cycle hardware multiplier Memories - 16/32/64/128/256 KB in-system self-programmable Flash - 2/4/8/16/32 KB SRAM System - Power-on Reset (POR) and Brown-out Detection (BOD) - Internal and external clock options with 48 MHz Digital Frequency Locked Loop (DFLL48M) - External Interrupt Controller (EIC) - Up to 16 external interrupts - One non-maskable interrupt - Two-pin Serial Wire Debug (SWD) programming, test and debugging interface Low-Power - Idle and Stand-by Sleep modes - Sleep Walking peripherals Peripherals - 8-channel Event System - Up to eight 16-bit Timer/Counters (TC), configurable as: - One 16-bit TC with two pare/capture channels - One 8-bit TC with two pare/capture channels - One 32-bit TC with two pare/capture channels, by using two TCs - 32-bit Real Time Counter (RTC) with clock/calendar function - Watchdog Timer (WDT) - CRC-32 generator - Up to six Serial munication Interfaces (SER), each configurable to operate as either: - USART with full-duplex and single-wire half-duplex configuration - Inter-Integrated Circuit (I2C) up to 400 k Hz - Serial Peripheral Interface (SPI) plete Data Sheet © 2023 Microchip Technology Inc. and its subsidiaries DS60001504G -...