900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




  Microchip Technology Semiconductor Electronic Components Datasheet  

SEC4410 Datasheet

HS Endpoint Processor

No Preview Available !

SEC2410/SEC4410
HS Endpoint Processor with USB 2.0, Smart Card,
& FMC for Secure Token & Storage
PRODUCT FEATURES
General Description
The SMSC SEC2410/SEC4410 are USB 2.0 compliant,
hi-speed bulk-only mass storage class peripheral
controllers. They are intended to be used to read and
write to popular flash media, including Secure Digital
(SD), and MultiMediaCardTM (MMC) families.
The SMSC SEC2410/SEC4410 are fully integrated,
single-chip solutions capable of ultra-high performance
operation. Average sustained transfer rates exceeding
35 MB/s are possible if the media and host can support
those rates. The SMSC SEC2410/SEC4410 includes
provisions to read/write to secure media formats, as well
as support AES encryption, without performance impact.
General Features
The SEC2410/SEC4410 is available in two lead-free
RoHS compliant packages:
— 64-pin QFN (9x9 mm) package
— 72-pin QFN (10x10 mm) package that includes debug
pins to interface to standard ARM debug tools
Hardware-controlled data flow architecture for all self-
mapped media
Pipelined hardware support for access to non-self-
mapped media
Order number (see next page) with i denote the
products that support the industrial temperature
range of -40ºC to 85ºC
Support included for secure media format on a
licensed, customized basis
— SD Secure
Hardware Features
Single-chip flash media controller containing:
— A multiplexed interface for use with combo card sockets
— SD/MMC flash media reader/writer
SDIO and MMC streaming mode support
Extended configuration options
Media Activity LED
GPIO configuration and polarity
— Up to 32 GPIOs for special function use
— One GPIO with up to 200 mA drive
On board 24 MHz crystal driver circuit
Optional external 24 MHz clock input
Datasheet
Internal card power FET
— 200 mA
— "Fold-back" short circuit protection
ARM M3 32-bit microprocessor
— 60 MHz execution speed at 1 cycle per instruction
(minimum)
— 32 KBytes of internal SRAM for a general purpose
scratchpad
— 96 KByte SRAM available for code execution
— 32 KByte internal code ROM
— JTAG interface
Supports a single external 3.3 V supply source;
internal regulators provide 1.2 V internal core voltage
for additional bill of materials and power savings
Optimized pinout improves signal routing, easing
implementation for improved signal integrity
1.2 V reference voltage for HSIC (SEC4410 only)
Flash Media Specification Compliance
Secure Digital 2.0
— HS-SD, SDHC, SDXC
— TransFlashTM and reduced form factor media
MultiMediaCard
— MMC version 4.2: 1/4/8-bit
— eMMC version 4.4
Software Features
Customizable vendor-specific data
Reduced memory footprint
Applications
Secure dongles and storage
Flash media card reader/writers
Desktop and mobile PCs
Consumer A/V and media players/viewers
Compatible with
– Microsoft® VistaTM and Vista ReadyBoostTM
– Windows® 7, XP, ME, 2K SP4
– Apple Mac OSx®
– Linux Mass Storage Class Drivers
SMSC SEC2410/SEC4410
DATASHEET
Revision 1.0 (03-07-13)


  Microchip Technology Semiconductor Electronic Components Datasheet  

SEC4410 Datasheet

HS Endpoint Processor

No Preview Available !

HS Endpoint Processor with USB 2.0, Smart Card, & FMC for Secure Token & Storage
Datasheet
Order Numbers:
ORDER NUMBERS
SEC2410/SEC2410-JZX
SEC4410/SEC4410i-JZX
SEC2410/SEC2410-AKZE
SEC4410/SEC4410i-AKZE
LEAD-FREE
ROHS COMPLIANT
PACKAGE
64QFN
72QFN
PACKAGE SIZE
(mm)
9x9
10x10
TEMPERATURE
RANGE
0ºC to 85ºC
-40ºC to 85ºC
0ºC to 85ºC
-40ºC to 85ºC
This product meets the halogen maximum concentration values per IEC61249-2-21.
For RoHS compliance and environmental information, please visit www.smsc.com/rohs
Copyright © 2013 SMSC or its subsidiaries. All rights reserved.
Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for
construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC
reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications
before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent
rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated
version of SMSC's standard Terms of Sale Agreement dated before the date of your order (the "Terms of Sale Agreement"). The product may contain design defects or errors
known as anomalies which may cause the product's functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not
designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property
damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of
this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSC’s website at http://www.smsc.com. SMSC is a registered
trademark of Standard Microsystems Corporation (“SMSC”). Product names and company names are the trademarks of their respective holders.
The Microchip name and logo, and the Microchip logo are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.
SMSC DISCLAIMS AND EXCLUDES ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND AGAINST INFRINGEMENT AND THE LIKE, AND ANY AND ALL WARRANTIES ARISING FROM ANY COURSE
OF DEALING OR USAGE OF TRADE. IN NO EVENT SHALL SMSC BE LIABLE FOR ANY DIRECT, INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL
DAMAGES; OR FOR LOST DATA, PROFITS, SAVINGS OR REVENUES OF ANY KIND; REGARDLESS OF THE FORM OF ACTION, WHETHER BASED ON CONTRACT;
TORT; NEGLIGENCE OF SMSC OR OTHERS; STRICT LIABILITY; BREACH OF WARRANTY; OR OTHERWISE; WHETHER OR NOT ANY REMEDY OF BUYER IS HELD
TO HAVE FAILED OF ITS ESSENTIAL PURPOSE, AND WHETHER OR NOT SMSC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Revision 1.0 (03-07-13)
2
DATASHEET
SMSC SEC2410/SEC4410


Part Number SEC4410
Description HS Endpoint Processor
Maker Microchip
Total Page 3 Pages
PDF Download

SEC4410 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 SEC4410 HS Endpoint Processor
Microchip





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy