SST25PF040B
Key Features
- Single Voltage Read and Write Operations - 2.3-3.6V
- Serial Interface Architecture - SPI Compatible: Mode 0 and Mode 3
- High Speed Clock Frequency - 80 MHz (2.7-3.6V operation) - 50 MHz (2.3-2.7V operation)
- Superior Reliability - Endurance: 100,000 Cycles (typical) - Greater than 100 years Data Retention
- Low Power Consumption: - Active Read Current: 10 mA (typical) - Standby Current: 5 μA (typical)
- Flexible Erase Capability - Uniform 4 KByte sectors - Uniform 32 KByte overlay blocks - Uniform 64 KByte overlay blocks
- Fast Erase and Byte-Program: - Chip-Erase Time: 35 ms (typical) - Sector-/Block-Erase Time: 18 ms (typical) - Byte-Program Time: 7 μs (typical)
- Auto Address Increment (AAI) Programming - Decrease total chip programming time over Byte-Program operations
- End-of-Write Detection - Software polling the BUSY bit in Status Register - Busy Status reado
