900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




  Microchip Technology Semiconductor Electronic Components Datasheet  

TC642 Datasheet

PWM Fan Speed Controller

No Preview Available !

M
TC642
PWM Fan Speed Controller with FanSenseTechnology
Features
• Temperature Proportional Fan Speed for Acoustic
Control and Longer Fan Life
• Efficient PWM Fan Drive
• 3.0V to 5.5V Supply Range:
- Fan Voltage Independent of TC642
Supply Voltage
- Supports any Fan Voltage
• FanSense™ Fault Detection Circuits Protect
Against Fan Failure and Aid System Testing
• Shutdown Mode for "Green" Systems
• Supports Low Cost NTC/PTC Thermistors
• Space Saving 8-Pin MSOP Package
• Over-temperature Indication
Applications
• Power Supplies
• Personal Computers
• File Servers
• Telecom Equipment
• UPSs, Power Amps, etc.
• General Purpose Fan Speed Control
Available Tools
• Fan Controller Demonstration Board (TC642DEMO)
• Fan Controller Evaluation Kit (TC642EV)
Package Types
SOIC/PDIP/MSOP
VIN 1
CF
VMIN
2
3
GND 4
TC642
8 VDD
7 VOUT
6 FAULT
5 SENSE
General Description
The TC642 is a switch mode fan speed controller for
use with brushless DC fans. Temperature proportional
speed control is accomplished using pulse width mod-
ulation (PWM). A thermistor (or other voltage output
temperature sensor) connected to the VIN input fur-
nishes the required control voltage of 1.25V to 2.65V
(typical) for 0% to 100% PWM duty cycle. Minimum fan
speed is set by a simple resistor divider on the VMIN
input. An integrated Start-up Timer ensures reliable
motor start-up at turn-on, coming out of shutdown
mode or following a transient fault. A logic low applied
to VMIN (Pin 3) causes fan shutdown.
The TC642 also features Microchip Technology's pro-
prietary FanSense™ technology for increasing system
reliability. In normal fan operation, a pulse train is
present at SENSE (Pin 5). A missing pulse detector
monitors this pin during fan operation. A stalled, open
or unconnected fan causes the TC642 to trigger its
Start-up Timer once. If the fault persists, the FAULT
output goes low and the device is latched in its shut-
down mode. FAULT is also asserted if the PWM
reaches 100% duty cycle, indicating a possible thermal
runaway situation, although the fan continues to run.
See Section 5.0, “Typical Applications”, for more
information and system design guidelines.
The TC642 is available in the standard 8-pin plastic
DIP, SOIC and MSOP packages and is available in the
commercial, extended commercial and industrial
temperature ranges.
2002 Microchip Technology Inc.
DS21444C-page 1


  Microchip Technology Semiconductor Electronic Components Datasheet  

TC642 Datasheet

PWM Fan Speed Controller

No Preview Available !

TC642
Functional Block Diagram
VIN
CF
VMIN
+
VOTF
+
OTF
SHDN
+
Control
Logic
Clock
Generator
VSHDN
+
TC642
3 x TPWM
Timer
Start-up
Timer
Missing
Pulse
Detect
GND
70mV (typ.)
10k
VDD
VOUT
FAULT
SENSE
DS21444C-page 2
2002 Microchip Technology Inc.


Part Number TC642
Description PWM Fan Speed Controller
Maker Microchip
PDF Download

TC642 Datasheet PDF





Similar Datasheet

1 TC642 PWM Fan Speed Controller
Microchip
2 TC642B PWM Fan Speed Controllers
Microchip
3 TC643 INTEGRATED FAN / MOTOR DRIVER
Microchip
4 TC646 PWM Fan Speed Controller
Microchip
5 TC647 PWM Fan Speed Controller
Microchip
6 TC647B PWM Fan Speed Controllers
Microchip
7 TC648 Fan Speed Controller
Microchip
8 TC649 PWM Fan Speed Controller
Microchip





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy