USB4712 Datasheet | Microchip Technology

Features - Auto-Flex Connect - Downstream port able to swap with upstream port, allowing USB host swapping - Triggering Flex Connect - USB4712 and USB4712LS execute  Flex Connect when new USB host is detected - USB4712PF executes Flex Connect via a  package pin or USB mand - Multi TRAK™ - Dedicated Transaction Translator per port - Port Swap - Configurable differential intra-pair signal swapping - PHYBoost - Programmable USB transceiver drive strength for recovering signal integrity - Vari Sense™ - Programmable USB receiver sensitivity - USB Link Power Management (LPM) support - Vendor Specific Messaging (VSM) support - Enhanced OEM configuration options available - 3.3 V supply voltage - AEC-Q100 pliance - Microchip parts are tested to meet or exceed the requirements of the AEC-Q100 automotive qualification standards - Packaging - 40-pin VQFN (5 x 5 mm) - Environmental - Grade 3 automotive temperature range (-40° to +85°C)  2018-2021 Microchip Technology Inc. DS00002774G-page 1 TO OUR VALUED CUSTOMERS It is our intention to provide our valued customers with the best documentation possible to ensure successful use of your Microchip products. To this end, we will continue to improve our publications to better suit your needs. Our publications will be refined and enhanced as new volumes and updates are introduced. If you have any questions or ments regarding this publication, please contact the Marketing munications Department via E-mail at docerrors@microchip.. We wele your feedback. Most Current Data Sheet To obtain the most up-to-date version of this data sheet, please register at our Worldwide Web site at: http://.microchip. You can determine the version of a data sheet by examining its literature number found on the bottom outside corner of any page. The last character of the literature number is the version number, (e.g., DS30000000A is version A of document DS30000000). Errata An errata sheet, describing minor operational differences from the data...