12CE518 Datasheet | Microchip Technology

Features : - In-Circuit Serial Programming (ICSP™) of program memory (via two pins) - Internal 4 MHz RC oscillator with programmable calibration - Power-on Reset (POR) - Device Reset Timer (DRT) - Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation - Programmable code-protection - Power saving SLEEP mode - Wake-up from SLEEP on pin change - Internal weak pull-ups on I/O pins - Internal pull-up on MCLR pin - Selectable oscillator options: - INTRC: Internal 4 MHz RC oscillator - EXTRC: External low-cost RC oscillator - XT: Standard crystal/resonator - LP: Power saving, low frequency crystal 12-bit wide instructions 8-bit wide data path Special function hardware registers Two-level deep hardware stack Direct, indirect and relative addressing modes for data and instructions Peripheral Features : - 8-bit real-time clock/counter (TMR0) with 8-bit programmable prescaler - 1,000,000 erase/write cycle EEPROM data memory - EEPROM data retention > 40 years CMOS Technology: - Low-power, high-speed CMOS EPROM/ EEPROM technology - Fully static design - Wide temperature range: - mercial: 0°C to +70°C - Industrial: -40°C to +85°C - Extended: -40°C to +125°C - Wide operating voltage range: -mercial: 3.0V to 5.5V -Industrial: 3.0V to 5.5V -Extended: 4.5V to 5.5V - Low power consumption - < 2 m A typical @ 5V, 4 MHz - 15 µA typical @ 3V, 32 k Hz - < 1 µA typical standby current © 1997 Microchip Technology Inc. Preliminary DS40172A-page 1 PIC12CE5XX TABLE OF...