900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




  Microchip Technology Semiconductor Electronic Components Datasheet  

MCP73223 Datasheet

Lithium Iron Phosphate (LiFePO4) Battery Charge Management Controller

No Preview Available !

www.DataSheet4U.com
MCP73123/223
Lithium Iron Phosphate (LiFePO4) Battery Charge
Management Controller with Input Overvoltage Protection
Features
• Complete Linear Charge Management Controller:
- Integrated Input Overvoltage Protection
- Integrated Pass Transistor
- Integrated Current Sense
- Integrated Reverse Discharge Protection
• Constant Current / Constant Voltage Operation
with Thermal Regulation
• 4.15V Undervoltage Lockout (UVLO)
• 18V Absolute Maximum Input with OVP:
- 6.5V - MCP73123
- 13V - MCP73223
• High Accuracy Preset Voltage Regulation
Through Full Temperature Range (-5°C to +55°C):
- +0.5% - MCP73123
- +0.6% - MCP73223
• Battery Charge Voltage Options:
- 3.6V - MCP73123
- 7.2V - MCP73223
• Resistor Programmable Fast Charge Current:
- 130 mA - 1100 mA
• Preconditioning of Deeply Depleted Cells:
- Available Options: 10% or Disable
• Integrated Precondition Timer:
- 32 Minutes or Disable
• Automatic End-of-Charge Control:
- Selectable Minimum Current Ratio:
5%, 7.5%, 10% or 20%
- Elapse Safety Timer: 4 HR, 6 HR, 8 HR or
Disable
• Automatic Recharge:
- Available Options: 95% or Disable
• Factory Preset Charge Status Output:
- On/Off or Flashing
• Soft Start
• Temperature Range: -40°C to +85°C
• Packaging: DFN-10 (3 mm x 3 mm)
Applications
• Low-Cost LiFePO4 Battery Chargers
• Power Tools
• Toys
• Backup Energy Storages
Description
The MCP73123/223 is a highly integrated Lithium Iron
Phosphate(LiFePO4) battery charge management
controller for use in space-limited and cost-sensitive
applications. The MCP73123/223 provides specific
charge algorithms for LiFePO4 batteries to achieve
optimal capacity and safety in the shortest charging
time possible. Along with its small physical size, the low
number of external components makes the
MCP73123/223 ideally suitable for various
applications. The absolute maximum voltage, up to
18V, allows the use of MCP73123/223 in harsh
environments, such as low cost wall wart or voltage
spikes from plug/unplug.
The MCP73123/223 employs a constant current /
constant voltage charge algorithm. The 3.6V per cell
factory preset reference voltage simplifies design with
2V preconditioning threshold. The fast charge,
constant current value is set with one external resistor
from 130 mA to 1100 mA. The MCP73123/223 also
limits the charge current based on die temperature
during high power or high ambient conditions. This
thermal regulation optimizes the charge cycle time
while maintaining device reliability.
The PROG pin of the MCP73123/223 also serves as
enable pin. When high impedance is applied, the
MCP73123/223 will be in standby mode.
The MCP73123/223 is fully specified over the ambient
temperature range of -40°C to +85°C. The MCP73123/
223 is available in a 10 lead, DFN package.
Package Types (Top View)
MCP73123/223
3x3 DFN *
VDD 1
VDD 2
VBAT 3
VBAT 4
NC 5
10 PROG
9 VSS
EP
11
8 VSS
7 STAT
6 NC
* Includes Exposed Thermal Pad (EP); see Table 3-1.
© 2010 Microchip Technology Inc.
DS22191B-page 1


  Microchip Technology Semiconductor Electronic Components Datasheet  

MCP73223 Datasheet

Lithium Iron Phosphate (LiFePO4) Battery Charge Management Controller

No Preview Available !

MCP73123/223
Typical Application
Ac-dc Adapter
4.7 µF
www.DataSheet4U.com
MCP73123 Typical Application
1 kΩ
1
VDD
2 VDD
7
STAT
5 NC
6 NC
3
VBAT
VBAT 4
PROG 10
VSS 9
VSS 8
4.7 µF
1.15 kΩ
+
1-Cell
LiFePO4
Battery
-
TABLE 1: AVAILABLE FACTORY PRESET OPTIONS
Charge
Voltage
OVP
Pre-
conditioning
Charge Current
Pre-
conditioning
Threshold
Precondition
Timer
Elapse
Timer
End-of-
Charge
Control
3.6V
6.5V Disable / 10%
2V Disable / Disable / 4 HR / 5% / 7.5% /
32 Minimum 6 HR / 8 HR 10% / 20%
7.2V
13V Disable / 10%
4V Disable / Disable / 4 HR / 5% / 7.5% /
32 Minimum 6 HR / 8 HR 10% / 20%
Note
1:
2:
3:
4:
5:
6:
IREG: Regulated fast charge current.
VREG: Regulated charge voltage.
IPREG/IREG: Preconditioning charge current; ratio of regulated fast charge current.
ITERM/IREG: End-of-Charge control; ratio of regulated fast charge current.
VRTH/VREG: Recharge threshold; ratio of regulated battery voltage.
VPTH/VREG: Preconditioning threshold voltage
Automatic
Recharge
No /
Yes
No /
Yes
Output
Status
Type 1 /
Type 2
Type 1 /
Type 2
TABLE 2: STANDARD SAMPLE OPTIONS
Part
Number
VREG
OVP IPREG/IREG Pre-charge Elapse ITERM/IREG VRTH/VREG VPTH/VREG Output
Timer
Timer
Status
MCP73123-22S/MF 3.6V 6.5V
10%
32 Min.
6 HR
10%
95%
2V Type 1
MCP73223-C2S/MF 7.2V 13V
10%
32 Min.
6 HR
10%
95%
4V Type 1
Note 1: Customers should contact their distributor, representatives or field application engineer (FAE) for support and sample.
Local sales offices are also available to help customers. A listing of sales offices and locations is included in the back of
this document. Technical support is available through the web site at: http//support.microchip.com
DS22191B-page 2
© 2010 Microchip Technology Inc.


Part Number MCP73223
Description Lithium Iron Phosphate (LiFePO4) Battery Charge Management Controller
Maker Microchip Technology
Total Page 30 Pages
PDF Download

MCP73223 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 MCP73223 Lithium Iron Phosphate (LiFePO4) Battery Charge Management Controller
Microchip Technology





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy