900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




  Microchip Technology Semiconductor Electronic Components Datasheet  

MCP73826 Datasheet

Single Cell Lithium-Ion Charge Management Controller

No Preview Available !

MCP73826
Single Cell Lithium-Ion Charge Management Controller
Features
• Linear Charge Management Controller for Single
Lithium-Ion Cells
• High Accuracy Preset Voltage Regulation:
+1% (max)
• Two Preset Voltage Regulation Options:
- 4.1V - MCP73826-4.1
- 4.2V - MCP73826-4.2
• Programmable Charge Current
• Automatic Cell Preconditioning of Deeply
Depleted Cells, Minimizing Heat Dissipation Dur-
ing Initial Charge Cycle
• Automatic Power-Down when Input Power
Removed
• Temperature Range: -20°C to +85°C
• Packaging: 6-Pin SOT-23A
Applications
• Single Cell Lithium-Ion Battery Chargers
• Personal Data Assistants
• Cellular Telephones
• Hand Held Instruments
• Cradle Chargers
• Digital Cameras
Typical Application Circuit
500 mA Lithium-Ion Battery Charger
MA2Q705
VIN
5V
10 µF
100 k
100 mNDS8434
6
VSNS
5 VIN
1 SHDN
4
VDRV
VBAT 3
GND 2
MCP73826
+ Single
Lithium-Ion
- Cell
10 µF
Description
The MCP73826 is a linear charge management con-
troller for use in space-limited, cost sensitive applica-
tions. The MCP73826 combines high accuracy
constant voltage, controlled current regulation, and cell
preconditioning in a space saving 6-pin SOT-23A pack-
age. The MCP73826 provides a stand-alone charge
management solution.
The MCP73826 charges the battery in three phases:
preconditioning, controlled current, and constant volt-
age. If the battery voltage is below the internal low-volt-
age threshold, the battery is preconditioned with a
foldback current. The preconditioning phase protects
the lithium-ion cell and minimizes heat dissipation.
Following the preconditioning phase, the MCP73826
enters the controlled current phase. The MCP73826
allows for design flexibility with a programmable charge
current set by an external sense resistor. The charge
current is ramped up, based on the cell voltage, from
the foldback current to the peak charge current estab-
lished by the sense resistor. This phase is maintained
until the battery reaches the charge-regulation voltage.
Then, the MCP73826 enters the final phase, constant
voltage. The accuracy of the voltage regulation is better
than ±1% over the entire operating temperature range
and supply voltage range. The MCP73826-4.1 is preset
to a regulation voltage of 4.1V, while the MCP73826-
4.2 is preset to 4.2V.
The MCP73826 operates with an input voltage range
from 4.5V to 5.5V. The MCP73826 is fully specified
over the ambient temperature range of -20°C to +85°C.
Package Type
6-Pin SOT-23A
SHDN 1
GND 2
VBAT 3
MCP73826
6 VSNS
5 VIN
4 VDRV
2002-2013 Microchip Technology Inc.
DS21705B-page 1


  Microchip Technology Semiconductor Electronic Components Datasheet  

MCP73826 Datasheet

Single Cell Lithium-Ion Charge Management Controller

No Preview Available !

MCP73826
Functional Block Diagram
DS21705B-page 2
2002-2013 Microchip Technology Inc.


Part Number MCP73826
Description Single Cell Lithium-Ion Charge Management Controller
Maker Microchip Technology
Total Page 24 Pages
PDF Download

MCP73826 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 MCP73826 Single Cell Lithium-Ion Charge Management Controller
Microchip Technology
2 MCP73828 Single Cell Lithium-Ion Charge Management Controller
Microchip Technology





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy