MTFDDAC128MAM - C400 2.5-Inch SATA NAND Flash SSD

Micron

MTFDDAC128MAM Datasheet Preview — Preview of MTFDDAC128MAM PDF

Datasheet Details

Part number	MTFDDAC128MAM
Manufacturer	Micron
File Size	377.18 KB
Description	C400 2.5-Inch SATA NAND Flash SSD
Datasheet	MTFDDAC128MAM-Micron.pdf

MTFDDAC128MAM Product details

Description

General Description Micron’s solid state drive (SSD) uses a single-chip controller with a SATA interface on the system side and n-channels of Micron NAND Flash internally.Packaged in an HDD replacement enclosure, the SSD integrates easily in existing storage infrastructures.The SSD is designed to use the SATA interface efficiently during both READs and WRITEs while delivering bandwidth-focused performance.SSD technology enables enhanced boot times, faster application load times, reduced power

Features

C400 2.5-Inch SATA NAND Flash SSD MTFDDAC128MAM, MTFDDAC256MAM, MTFDDAC512MAM MTFDDAK128MAM, MTFDDAK256MAM, MTFDDAK512MAM Features.
Micron® 25nm MLC NAND Flash.
RoHS-compliant package.
SATA 6 Gb/s interface.
ATA modes supported.
PIO mode 3, 4.
Multiword DMA mode 0, 1, 2.
Ultra DMA mode 0, 1, 2, 3, 4, 5.
Industry-standard, 512-byte sector size support.
Hot-plug capable.
Native command queuing support with 3.

📁 MTFDDAC128MAM Similar Datasheet

MTF-26 - (MTF-xx) Centerline Single and Dual ROW (Methode Electronics)
MTF-T057AMSLN-V1 - LCD Module (Microtips)
MTF-T057AMSLN-V4 - LCD Module (Microtips)
MTF-TQ24NN731-LB - LCD (Microtips)
MTF-TV57NN721-AV - LCD (Microtips)
MTF-xx - (MTF-xx) Centerline Single and Dual ROW (Methode Electronics)
MTF0280QT-17 - Display Module (Microtech)
MTF0320CMIL-06 - TFT LCD Module (ICbanQ)

Other Datasheets by Micron

MTFDDAC050SAL-1N1AA - P300 2.5-Inch SATA NAND Flash SSD
MTFDDAC256MAM - C400 2.5-Inch SATA NAND Flash SSD
MTFDDAC512MAM - C400 2.5-Inch SATA NAND Flash SSD
MTFDDACxxxSAL1x1 - P300 2.5-Inch SATA NAND Flash SSD
MTFDDAA064MAM - C400v 1.8-Inch SATA NAND Flash SSD
MTFDDAA120MBB-2AE16ABYY - M500DC 1.8-Inch TCG Enterprise SATA NAND Flash SSD

Published: Jul 7, 2015 |