900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Micron

MTFDJAL1T9MBU Datasheet Preview

MTFDJAL1T9MBU Datasheet

2.5-Inch SAS NAND Flash SSD

No Preview Available !

S600DC Series 2.5-Inch SAS NAND Flash SSD
Features
S600DC Series 2.5-Inch SAS NAND Flash
SSD
MTFDJAK400MBS, MTFDJAK400MBT, MTFDJAK800MBS,
MTFDJAK800MBT, MTFDJAL1T6MBS, MTFDJAL1T6MBT,
MTFDJAL3T2MBS, MTFDJAL3T2MBT, MTFDJAK480MBT,
MTFDJAK960MBT, MTFDJAL1T9MBT, MTFDJAL3T8MBT,
MTFDJAL1T9MBU, MTFDJAL3T8MBU, MTFDJAK200MBW,
MTFDJAK400MBW
Features
• Four endurance levels
– S655DC = 25 DWPD; S650DC = 10 DWPD
– S630DC = 2–3 DWPD; S610DC = <1 DWPD
• Micron® 16nm MLC NAND Flash
• RoHS-compliant package
• SAS
– Interface = 12 Gb/s
– Speed = 3 Gb/s, 6 Gb/s, 12 Gb/s, and auto-speed
negotiation
– SAS-3 support
• SAM-5 compliant
• Enterprise sector size support = 512, 520, 524, 528,
4096, 4160, 4192, and 4224-byte
• Hot-plug capable
• 128-entry command queue depth
• Digitally signed firmware for SED and non-SED
• FIPS140-2 level 2 certification option available on
each S650DC 2.5-inch device:
400GB, 800GB, 1600GB, and 3200GB
• Secure erase via format unit
• Reliability
– MTTF: 2.5 million device hours1
– Static and dynamic wear leveling
– Uncorrectable bit error rate (UBER): 1 × 1017 bits
transferred
• Capacity 2 (unformatted): 200GB, 400GB, 480GB,
800GB, 960GB, 1600GB, 1920GB, 3200GB, 3840GB
• Endurance: TBW over warranty period4
– S655DC (25 DWPD):
200GB-8PB, 400GB-17PB
– S650DC (10 DWPD):
400GB-7PB, 800GB-14PB
1600GB-29PB, 3200GB-58PB
• Endurance: TBW over warranty period4
– S630DC (2–3 DWPD):
400GB-2.1PB, 480GB-2.6PB,
800GB-2.9PB, 960GB-5.2PB,
1600GB-5.8PB, 1920GB-10PB,
3200GB-12PB, 3840-21PB
– S610DC (1 DWPD):
1920GB-2.8PB, 3840GB-5.6PB
• Electrical
– Supply voltage: 5 VDC (±5%) and 12 VDC (±5%)
• Mechanical
– 2.5-inch drive: 100.5mm × 69.85mm × 7mm, and
100.5mm × 69.85mm × 15mm
• Field-upgradeable firmware
• Power consumption: 9W (TYP) and 12W (MAX)
– Configurable through information exceptions
mode page
• Operating temperature
– 0°C to +50°C (MAX)3
Notes:
1. Product achieves a mean time to failure
(MTTF) based on population statistics that
are not relevant to individual units.
2. 1GB = 1 billion bytes; formatted capacity is
less.
3. Based on ambient air temperature.
4. Total bytes written (TBW): Warranty de-
fined in the product manual is five years or
device expiration as indicated by the device
life indicator, whichever comes first.
Warranty: Contact your Micron sales representative
for further information regarding the product, includ-
ing product warranties.
CCMTD-1725822587-3891
s600dc_series_2_5_sas_ssd.pdf - Rev. H 9/17 EN
1 Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2015 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.




Micron

MTFDJAL1T9MBU Datasheet Preview

MTFDJAL1T9MBU Datasheet

2.5-Inch SAS NAND Flash SSD

No Preview Available !

S600DC Series 2.5-Inch SAS NAND Flash SSD
Features
Table 1: Performance
Notes apply to entire table
Sequential
Device
128KB Transfer
and Read
Write
Capacity
(MB/s)
(MB/s)
S655DC
200GB
1550
600
400GB
1700
850
S650DC
400GB
1550
625
800GB
1850
850
1600GB
1900
850
3200GB
1900
800
S630DC
400GB
1400
490
480GB
1550
615
800GB
1400
710
960GB
1700
850
1600GB
1600
850
1920GB
1850
850
3200GB
1600
850
3840GB
1850
770
S610DC
1920GB
1700
850
3840GB
1600
770
Random
4KB Transfer
Read
(KIOPS)
Write
(KIOPS)
200 120
200 120
180 67
200 80
200 80
200 80
180 20
180 30
180 20
180 30
180 20
180 30
180 20
180 30
190 12
190 15
Random
4KB Transfer (70/30)
Mixed Read/Write
(KIOPS)
Average
Latency (µs)
85 115
115 115
80 115
105 115
120 115
120 115
45 115
45 115
45 115
65 115
45 115
65 115
45 115
65 115
45 115
45 115
Notes:
1. Typical I/O performance numbers: measured using an iometer in a steady state region with a queue depth of
32 for sequential and random transfers and write cache enabled; a queue depth of 1 for READ/WRITE laten-
cy values.
2. Consistent host system interface, configurations, and variables: maintained with variation only in the drive
being tested.
3. Response time measurement conditions: recorded with nominal power at 25 °C ambient temperature.
4. Page-to-page response times: derived from all possible page-to-page accesses on a sequentially precondi-
tioned drive.
5. Average response time: derived from at least 5000 access measurements between programmable pages on a
randomly preconditioned drive to ensure a true statistical random average.
CCMTD-1725822587-3891
s600dc_series_2_5_sas_ssd.pdf - Rev. H 9/17 EN
2 Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2015 Micron Technology, Inc. All rights reserved.


Part Number MTFDJAL1T9MBU
Description 2.5-Inch SAS NAND Flash SSD
Maker Micron
Total Page 30 Pages
PDF Download

MTFDJAL1T9MBU Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 MTFDJAL1T9MBT 2.5-Inch SAS NAND Flash SSD
Micron
2 MTFDJAL1T9MBU 2.5-Inch SAS NAND Flash SSD
Micron





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy