Datasheet4U Logo Datasheet4U.com

ME301C - DC-DC Converter

Datasheet Summary

Features

  • Ultra low ripple and noise；.
  • Low input current：6µA(Type)；.
  • Operating voltage range：0.9V~6.5V；.
  • Output voltage range：2.0V~7.0V(step 0.1V)；.
  • Output voltage accuracy：±2.5%；.
  • Output Current：if Vin=3.0V and Vout=3.3V，then Iout=250mA；.
  • Low start voltage：≤0.9V( at Iout=1mA)；.
  • Maximum oscillator frequency： 100KHz(Typ. )；.
  • High Efficiency：85%(Type)；.

📥 Download Datasheet

Datasheet preview – ME301C

Datasheet Details

Part number ME301C
Manufacturer Microne
File Size 276.08 KB
Description DC-DC Converter
Datasheet download datasheet ME301C Datasheet
Additional preview pages of the ME301C datasheet.

📁 Similar Datasheet

  • ME3-ETO - Electrochemical Sensor (Winsen)
  • ME3-HF - Electrochemical Sensor (Winsen)
  • ME3-NO2 - Electrochemical Gas Sensor (Winsen)
  • ME3102 - 1A Synchronous Buck DC-DC Converter (ChipSourceTek)
  • ME3108 - 2A COT fast response synchronous buck DC/DC converter (ChipSourceTek)
  • ME3110 - Synchronous rectification buck DC-DC converter (ChipSourceTek)
  • ME3113 - 3A load synchronous rectification DC-DC buck converter (ChipSourceTek)
  • ME3113B - BLUE SIDE BACKLIGHT (Micro Electronics)
  • ME3123 - 3A load synchronous rectification DC-DC buck converter (ChipSourceTek)
  • ME3125 - 5A load synchronous rectification DC-DC buck converter (ChipSourceTek)
Other Datasheets by Microne
  • ME3101 - 500mA Synchronous Step-Down DC/DC Converters
  • ME3101A10 - 500mA Synchronous Step-Down DC/DC Converters
  • ME3101A12 - 500mA Synchronous Step-Down DC/DC Converters
  • ME3101A18 - 500mA Synchronous Step-Down DC/DC Converters
  • ME3101A33 - 500mA Synchronous Step-Down DC/DC Converters
  • ME3103 - 1A Step-Down DC-DC Converter
  • ME3104 - 2A Synchronous Buck DC-DC Converter
  • ME3107 - Ultra-Low Quiescent 760nA Synchronous Step-Down DC/DC Converter

Full PDF Text Transcription

Click to expand full text
MExx1C Series Ver 02 MExx1C Series DC-DC Converter MExx1C Series is a VFM Step-up DC/DC converter IC with ultra-low supply current by CMOS process. High frequency noise that occurs during switching is reduced by using advanced circuit designed, output voltage is programmable in 0.1V steps between 2.0~7.0V. A low ripple, high efficiency step-up DC/DC converter for MExx1C can be constructed of with only three external components. Also available is a CE(chip enable) function that reduce power dissipation During shut-down mode., and an independent Vdd pin function (separated power supply and voltage detect pins) for fly-back circuits. MExx1Cx is suitable for use with battery-powered instruments with low noise and ultra low supply current; Ext function can use for large output circuit.
Published: |