900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Micropac Industries

53111-2XA Datasheet Preview

53111-2XA Datasheet

POWER MOSFET OPTOCOUPLER

No Preview Available !

53111
POWER MOSFET OPTOCOUPLER,
90 V/1 , Hermetically Sealed,
DSCC Approved 5962-9314001 and 5962-9314002
Mii
MICROCIRCUITS PRODUCTS
DIVISION
Features:
Hermetically Sealed 8-Pin Dual-In-Line
package
Small Size and Weight
Options: 5mA or 10mA input forward current
Performance Guaranteed over –55°C to
+125°C Ambient Temperature Range
AC/DC Signal & Power Switching
Maximum Average Current
AC/DC: 0.8 A
DC only: 1.6 A
1500 VDC Withstand Test Voltage
High Transient Immunity
5 A Output Surge Current
Shock and Vibration Resistant
MIL-PRF-38534 Compliant
Equivalent to HSSR7111/7112
Applications:
Satellite/Space Systems
Military/High Reliability Systems
Standard 28 VDC and 48 VDC Load Driver
Standard 24 VAC Load Driver
AC/DC Electromechanical and Solid State
Relay Replacement
I/O Modules
DESCRIPTION
The 53111 is a single channel, hermetically sealed, power MOSFET optocoupler. Low on-resistance of the
MOSFET output, combined with 1500 VDC isolation between input and output, makes this optocoupler ideal for
solid state relay applications. Operation is specified over the full military temperature range. The part is supplied in
an eight-pin, dual-in-line ceramic package, available as COTS, as fully compliant MIL-PRF-38534 Class H device,
or with custom screening. Lead options support both through-hole and surface-mount assembly. The part is
normally shipped with gold plated leads, but lead finishes per MIL-PRF-38534 are available.
Functionally, the device operates as a single-pole, normally open (1 Form A) solid state relay. The device is
actuated by an input current, which can be supplied from standard logic types such as open-collector TTL. The
input current biases a light emitting diode that is optically coupled to an integrated photovoltaic diode array. The
photovoltaic array powers control circuitry that operates the output MOSFETs.
Optimum switching of either AC or DC loads is provided by a configurable output. For AC loads, connection A in
Figure 1 must be used. Connection A will also switch DC loads but connection B, in Figure 1, provides DC-only
operation with the advantages of substantial reduction in on-resistance and twice the output current capability as
that obtained with connection A.
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCS PRODUCTS DIVISION 905 E. Walnut St., Garland, TX 75040 (972) 272-3571 Fax (972) 494-2281
www.micropac.com
E-MAIL: hybridsales@micropac.com
5/22/02
Pg. 1 of 11




Micropac Industries

53111-2XA Datasheet Preview

53111-2XA Datasheet

POWER MOSFET OPTOCOUPLER

No Preview Available !

53111
Power MOSFET Optocoupler
___________________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
Storage Temperature Range ..................................................................................................................-65°C to +150°C
Operating Ambient Temperature - TA.....................................................................................................-55°C to +125°C
OJupnecrtaiotinngTeCmaspeerTaetumrepe- rTaJtu...r.e...-..T...C............................................................................................................................................................................................................................................+..1..4. 155°C0°(C1)
Lead Solder Temperature (1.6mm below seating plane).......................................................................... 260°C for 10s
Average Input Current - IF ........................................................................................................................................20 mA
Peak Repetitive Input Current - IFpk …(Pulse Width < 100ms; duty cycle < 50%) ...............................................40 mA
Peak Surge Input Current - IFPK surge…(Pulse Width < 0.2ms; duty cycle < 0.1%)........................................ 100 mA
Reverse Input Voltage - VR .................................................................................................................................... 5 V
Average Output Current
Connection A – IO............................................................................................................................................ 0.8 A
Connection B - IO ............................................................................................................................................ 1.6 A
Single Shot Output Current - Figure 4
Connection A - IOpk surge…(Pulse width < 10ms) ............................................................................................. 5 A
Connection B - IOpk surge…(Pulse width < 10ms) ........................................................................................... 10 A
Output Voltage
Connection A - VO ............................................................................................................................ -90 V to +90 V
Connection B - VO ............................................................................................................................... 0
Average Output Power Dissipation - Figure 5 ............................................................................................
V to
800
+90
mW
V
(2)
RECOMMENDED OPERATING CONDITIONS:
PARAMETER
SYMBOL
Input Current (on)
Input Voltage (off)
Operating Temperature
IF (ON)
VF (OFF)
TA
DEVICE
TYPE
-01
-02
All
All
MIN
10
5
0
-55
MAX
20
20
0.6
+125
UNITS
mA
mA
VDC
°C
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCS PRODUCTS DIVISION 905 E. Walnut St., Garland, TX 75040 (972) 272-3571 Fax (972) 494-2281
www.micropac.com
E-MAIL: hybridsales@micropac.com
5/22/02
Pg. 2 of 11


Part Number 53111-2XA
Description POWER MOSFET OPTOCOUPLER
Maker Micropac Industries
PDF Download

53111-2XA Datasheet PDF






Similar Datasheet

1 53111-2XA POWER MOSFET OPTOCOUPLER
Micropac Industries
2 53111-2XC POWER MOSFET OPTOCOUPLER
Micropac Industries





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy