900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




  Microsemi Electronic Components Datasheet  

1N3027B Datasheet

1 WATT METAL CASE ZENER DIODES

No Preview Available !

SCOTTSDALE DIVISION
1N3016B thru 1N3051B, e3
1 WATT METAL CASE ZENER DIODES
DESCRIPTION
This well established zener diode series for the 1N3016 thru 1N3051
JEDEC registration in the metal case DO-13 package provides a glass
hermetic seal for 6.8 to 200 volts. It is also well suited for high-reliability
applications where it is available in JAN, JANTX, and JANTXV military
qualifications. Lower voltages are also available in the 1N3821 thru
1N3830 series (3.3 V to 7.5 V) in the same package (see separate data
sheet). Microsemi also offers numerous other Zener diode products for a
variety of other packages including surface mount.
APPEARANCE
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
DO-13
FEATURES
Zener Voltage Range: 6.8V to 200V
Hermetically sealed DO-13 metal package
Internally solder-bonded construction.
Also available in JAN, JANTX, JANTXV qualifications
per MIL-PRF19500/115 by adding the JAN, JANTX,
or JANTXV prefixes to part numbers for desired level
of screening, e.g. JANTX1N3016B,
JANTXV1N3051B, etc.
Surface mount also available with 1N3016BUR-1 thru
1N3051BUR-1 series on separate data sheet
RoHS Compliant devices available by adding “e3” suffix
APPLICATIONS / BENEFITS
Regulates voltage over a broad operating current
and temperature range
Wide selection from 6.8 to 200 V
Tight voltage tolerances available
Low reverse (leakage) currents
Nonsensitive to ESD
Hermetically sealed metal package
Inherently radiation hard as described in
Microsemi MicroNote 050
MAXIMUM RATINGS
Operating Junction and Storage Temperatures:
-65oC to +175oC
THERMAL RESISTANCE: 50oC/W* junction to lead
at 0.375 inches (10 mm) from body or 110 oC/W
junction to ambient when leads are mounted on FR4
PC board with 4 mm2 copper pads (1 oz) and track
width 1 mm, length 25 mm
DC Power Dissipation*: 1.0 Watt at TL < +125oC 3/8”
(10 mm) from body or 1.0 Watts at TL < +65oC when
mounted on FR4 PC board as described for thermal
resistance above (also see Fig 1)
Forward Voltage @ 200 mA: 1.5 Volts.
Solder Temperatures: 260 o C for 10 s (maximum)
MECHANICAL AND PACKAGING
CASE: DO-13 (DO-202AA), welded, hermetically
sealed metal and glass
FINISH: All external surfaces are Tin-Lead (Pb/Sn)
or RoHS Compliant annealed matte-Tin (Sn) plating
and solderable per MIL-STD-750 method 2026
POLARITY: Cathode connected case.
WEIGHT: 1.4 grams.
Tape & Reel option: Standard per EIA-296 (add
“TR” suffix to part number)
See package dimensions on last page
* For further mounting reference options, thermal resistance from junction to metal case is < 20 oC/W
when mounting DO-13 metal case directly on heat sink.
Copyright © 2006
3-12-2006 REV B
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1


  Microsemi Electronic Components Datasheet  

1N3027B Datasheet

1 WATT METAL CASE ZENER DIODES

No Preview Available !

SCOTTSDALE DIVISION
1N3016B thru 1N3051B, e3
1 WATT METAL CASE ZENER DIODES
*ELECTRICAL CHARACTERISTICS @ 25oC
NOMINAL
ZENER
ZENER
JEDEC
TYPE
NUMBER
VOLTAGE
VZ @ IZT
(Note 2)
TEST
CURRENT
IZT
MAXIMUM ZENER IMPEDANCE
(Note 3)
ZZT @ IZT
ZZK @ IZK
(Note 1)
Volts
mA
OHMS OHMS
mA
1N3016B
6.8
37 3.5 700 1.0
1N3017B
7.5
34
4.0 700
.5
1N3018B
8.2
31
4.5 700
.5
1N3019B
9.1
28
5 700 .5
1N3020B
10
25
7 700 .25
1N3021B
11
23
8 700 .25
1N3022B
12
21
9 700 .25
1N3023B
13
19 10 700 .25
1N3024B
15
17 14 700 .25
1N3025B
16
15.5 16 700 .25
1N3026B
18
14 20 750 .25
1N3027B
20
12.5 22 750 .25
1N3028B
22
11.5 23 750 .25
1N3029B
24
10.5 25 750 .25
1N3030B
27
9.5 35 750 .25
1N3031B
30
8.5 40 1000 .25
1N3032B
33
7.5 45 1000 .25
1N3033B
36
7.0 50 1000 .25
1N3034B
39
6.5 60 1000 .25
1N3035B
43
6.0 70 1500 .25
1N3036B
47
5.5 80 1500 .25
1N3037B
51
5.0 95 1500 .25
1N3038B
56
4.5 110 2000 .25
1N3039B
62
4.0 125 2000 .25
1N3040B
68
3.7 150 2000 .25
1N3041B
75
3.3 175 2000 .25
1N3042B
82
3.0 200 3000 .25
1N3043B
91
2.8 250 3000 .25
1N3044B
100
2.5 350 3000 .25
1N3045B
110
2.3 450 4000 .25
1N3046B
120
2.0 550 4500 .25
1N3047B
130
1.9 700 5000 .25
1N3048B
150
1.7
1000
6000
.25
1N3049B
160
1.6
1100
6500
.25
1N3050B
180
1.4
1200
7000
.25
1N3051B
200
1.2
1500
8000
.25
*JEDEC Registered Data. †Not JEDEC Data.
MAXIMUM
ZENER
CURRENT
IZM
(Note 4)
mA
140
125
115
105
95
85
80
74
63
60
52
47
43
40
34
31
28
26
23
21
19
18
17
15
14
12
11
10
9.0
8.3
8.0
6.9
5.7
5.4
4.9
4.6
MAXIMUM
REVERSE
LEAKAGE
CURRENT†
IR @ VR
μA Volts
150 5.2
100 5.7
50 6.2
25 6.9
25 7.6
10 8.4
10 9.1
10 9.9
10 11.4
10 12.2
10 13.7
10 15.2
10 16.7
10 18.2
10 20.6
10 22.8
10 25.1
10 27.4
10 29.7
10 32.7
10 35.8
10 38.8
10 42.6
10 47.1
10 51.7
10 56.0
10 62.2
10 69.2
10 76.0
10 83.6
10 91.2
10 98.8
10 114.0
10 121.6
10 136.8
10 152.0
TYPICAL
TEMP. COEFF.
OF ZENER
VOLTAGE
αVZ
%/oC
.040
.045
.048
.050
.055
.060
.065
.065
.070
.070
.075
.075
.080
.080
.085
.085
.085
.085
.090
.090
.090
.090
.090
.090
.090
.090
.090
.090
.090
.095
.095
.095
.095
.095
.095
.100
NOTES: 1.
2.
3.
4.
When using JEDEC numbers, B suffix signifies +/-5% tolerance on nominal zener voltage. The suffix A is used to identify +/-10%
tolerance; no suffix indicates +/-20% tolerance: suffix C is used to identify +/- 2%; and suffix D is used to identify +/- 1% tolerance.
Zener Voltage (VZ) is measured with junction in thermal equilibrium with still air at a temperature of 25oC. The test currents (IZT) at
nominal voltages provide a constant 0.25 watts.
The zener impedance is derived when a 60 cycle ac current having an rms value equal to 10% of the dc zener current (IZT or
IZK) is superimposed on IZT or IZK. Zener impedance is measured at 2 points to ensure a sharp knee on the breakdown curve
and to eliminate unstable units. See MicroNote 202 for variation in dynamic impedance with different zener currents.
These values of IZM may often be exceeded in the case of individual diodes. The values shown are calculated for a unit at the high
voltage end of its tolerance range. Allowance has also been made for the rise in zener voltage above VZT that results from zener
impedance and the increase in junction temperature as a unit approaches thermal equilibrium at a dissipation of 1 watt. The IZM
values shown for +/-5% tolerance units may be used with little error for +/-10% tolerance units, but should be reduced by 7% to
include a +/-20% tolerance unit near the high voltage end of its tolerance range.
Copyright © 2006
3-12-2006 REV B
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 2


Part Number 1N3027B
Description 1 WATT METAL CASE ZENER DIODES
Maker Microsemi
Total Page 3 Pages
PDF Download

1N3027B Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 1N3027 1.0 WATT METAL SILICON ZENER DIODES
Motorola
2 1N3027 Diode Zener Single 20V 20% 1W 2-Pin DO-13
New Jersey Semiconductor
3 1N3027A Diode Zener Single 20V 10% 1W 2-Pin DO-13
New Jersey Semiconductor
4 1N3027B 1 WATT ZENER DIODES
Compensated Deuices Incorporated
5 1N3027B Diode Zener Single 20V 5% 1W 2-Pin DO-13
New Jersey Semiconductor
6 1N3027B 1 WATT METAL CASE ZENER DIODES
Microsemi
7 1N3027B-1 (1N3016B-1 - 1N3045B-1) 1 Watt Glass Case Zener Diodes
Microsemi
8 1N3027BUR-1 Surface Mount 1.5W GLASS ZENER DIODES
Microsemi
9 1N3027C Diode Zener Single 20V 2% 1W 2-Pin DO-13
New Jersey Semiconductor





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy