Datasheet4U Logo Datasheet4U.com

1N5944BP - Axial-Leaded 1.5 Watt Zener Diodes

Download the 1N5944BP datasheet PDF. This datasheet also covers the 1N5913BP variant, as both devices belong to the same axial-leaded 1.5 watt zener diodes family and are provided as variant models within a single manufacturer datasheet.

Description

The 1N5913-5956B series of 1.5 watt Zeners provides voltage regulation in a selection from 3.3 to 200 volts with different tolerances as identified by suffix letter on the part.

These plastic encapsulated Zeners have moisture classification of Level 1 with no dry pack required.

Features

  • below. The plastic molded Zeners with a P suffix provide a lower thermal resistance (junction to lead) compared to the optional glass body (G suffix) for these same JEDEC part numbers. Both package options are available by Microsemi. Microsemi also offers numerous other Zener products to meet higher or lower power and test-current.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (1N5913BP-Microsemi.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
1N5944BP 1.5 Watt Zener Diode MCC
1N5944BP-TPX01 1.5 Watt Zener Diode ZBMCC
1N5944B 1.5W ZENER DIODE WON-TOP ELECTRONICS
1N5944B ZENER DIODE RFE
1N5944B Zener Voltage Regulators ON Semiconductor

Other Datasheets by Microsemi (Microchip)

Part Number Description
1N5944BUR-1 METALLURGICALLY BONDED GLASS SURFACE MOUNT 1.5 WATT ZENERS
1N5940BP Axial-Leaded 1.5 Watt Zener Diodes
1N5940BUR-1 METALLURGICALLY BONDED GLASS SURFACE MOUNT 1.5 WATT ZENERS
1N5941BP Axial-Leaded 1.5 Watt Zener Diodes
1N5941BUR-1 METALLURGICALLY BONDED GLASS SURFACE MOUNT 1.5 WATT ZENERS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
WWW.Microsemi .COM SCOTTSDALE DIVISION 1N5913BP thru 1N5956BP (Plastic) Axial-Leaded 1.5 Watt Zener Diodes DESCRIPTION The 1N5913-5956B series of 1.5 watt Zeners provides voltage regulation in a selection from 3.3 to 200 volts with different tolerances as identified by suffix letter on the part. These plastic encapsulated Zeners have moisture classification of Level 1 with no dry pack required. They are also available in various military screening levels by adding a prefix identifier as described in the Features below. The plastic molded Zeners with a P suffix provide a lower thermal resistance (junction to lead) compared to the optional glass body (G suffix) for these same JEDEC part numbers. Both package options are available by Microsemi.
Published: |